bmw x5 key programming

[ezenigbo]

i have one bmw x5 with one original key,i need two more keys,how can i program the 2 keys on-board?

[highline]

Hello
You can do it for example with the AK400 (for BMW, the device is OK) programmed into the CAS.
Marco

[simon77]

what year is bmw and what tools do you have ie programmer key machine

[ezenigbo]

am having t300 key programmer,the vehicle should be 2003

[gepakg]

impossible with t300 or ad100

read EWS3 and post dump,key can be created in pcf7935

regards Gepa


am having t300 key programmer,the vehicle should be 2003

[ezenigbo]

can somone give me wiring diagram for reading the motorola mcu ? but as am havig the key logic for the original key,is there no way to write thesame logic to a chip to start the car?

[gepakg]

be care with reading this MCU,some masksets are secured and when you try reading possible to erase eprom and lost sychro between ews & ecu...

from dump i will make for you key logic for active keys

regards Gepa


can somone give me wiring diagram for reading the motorola mcu ? but as am havig the key logic for the original key,is there no way to write thesame logic to a chip to start the car?

[gepakg]

by me ETL hc11 programmer is the safest way for reading secured MCU`s...


be care with reading this MCU,some masksets are secured and when you try reading possible to erase eprom and lost sychro between ews & ecu...

from dump i will make for you key logic for active keys

regards Gepa

[ezenigbo]

here is the dump

[cjawahir]

looks good , you can make key for position 4,5,6.7.8.9.

vin # WBAFB31020LG94905

prod date 29 09 00

what programmer did you use ?

cj

[ezenigbo]

i used carprog,please enlighten me more on how to make the key

[gepakg]

your VIN is WBAFB31020LG94905? and mileage 245384 km?

regards Gepa


here is the dump

[gepakg]

do you have zed-qx or kmrw ?

logic for first key: 5500D758F98CAFA959BF

also you have now 4 activated keys

regards Gepa


i used carprog,please enlighten me more on how to make the key

[cjawahir]

well you did the the most difficult part read the ews 3 ,

you just need transponder programmer like Gepa said, also you can check this Gambit programmer CAR KEY MASTER II | obdchina (http://www.obdchina.com/gambit-programmer-car-key-master-ii/599.html)

cj

[ezenigbo]

please give me more 2 logic,i have zed qx ,what type of transponder should i write it?

[gepakg]

write it as pcf7935,for first block and end block select 3,and thats enough for starting car...what do you need more?

regards Gepa


please give me more 2 logic,i have zed qx ,what type of transponder should i write it?

[cjawahir]

oh did not see Gepa post

[ezenigbo]

i want to have 3 keys programmed

[gepakg]

you need logic for 3 keys? do you need now activated keys or to change activation in dump for rest of keys?

regards Gepa


i want to have 3 keys programmed

[ezenigbo]

if there is any thing i can do to the dump so that any key can start the car even without transponder,am oky

[houssem12]

can somone give me wiring diagram for reading the motorola mcu

[gokey]

maskset ??

[gepakg]

for first key logic:5500D758F98CAFA959BF

second key:5501217D9A190E39DAD0

third key:5502CFDF1B7AB1 xx xx xx

xx xx xx are the bytes that you can alone calculate:-)

write it on blank pcf7935as only select that first and end block of shadow memory be block 3

in zed-qx meny pcf7935 have everything what i explain,program it and enjoy!

regards Gepa


i want to have 3 keys programmed

[ezenigbo]

please i did not understand the no. 3 logic xx xx xx,help me show it like 1 and 2 so that i can just get the philip empty transponde and write it.after writting i think i can put the chip inside a remote key and it would not disturb remote.how can i program remote?attached is the type of remote key

[cjawahir]

please i did not understand the no. 3 logic xx xx xx,help me show it like 1 and 2 so that i can just get the philip empty transponde and write it.after writting i think i can put the chip inside a remote key and it would not disturb remote.how can i program remote?attached is the type of remote key

you cannot put the chip inside this key this is the EML type transponder and remote in one .

but you can program the remote easy .

cj

[ezenigbo]

but if i send the key logic from the 3 keys i want to use,can they be edited into the dump?

[cjawahir]

hi , you can use Gambit to make the EML key .


cj