PDA

View Full Version : could anyone read ISN from this cas3+ file, please?


Yhoni
18th June, 2023, 08:54 AM
Hello friends, I had read a Cas3+ Bmw e83 ref: "6135 9 147 196" - "5wk4 9513OBR" eeprom file, and when I try extract ISN number I get "FF FF FF...." only. :hmmmm2:

Could anyone extract ISN number from the attached file, please?.

Thanks.
kiszka
18th June, 2023, 10:32 AM
Hello friends, I had read a Cas3+ Bmw e83 ref: "6135 9 147 196" - "5wk4 9513OBR" eeprom file, and when I try extract ISN number I get "FF FF FF...." only. :hmmmm2:

Could anyone extract ISN number from the attached file, please?.

Thanks.
at which position do you want to make the key
corrected the short ISN
I sorted out the keys
Yhoni
18th June, 2023, 11:01 AM
at which position do you want to make the key
corrected the short ISN
I sorted out the keys

Hello friend, I donīt want to do keys for the moment, I want to learn to extract ISN correctly , but I'm trying to read with vvdi2 by eeprom file and I only get "FF".... :(

I can do the key file, but the ISN show me is "FF"....

Could you find the correct ISN,pease?

Or, Is it possible that the "ISN" in this Cas3+ had been modified to "FF", or It's corrupt...?

Thanks.
ricked
18th June, 2023, 11:07 AM
Hello friend, I donīt want to do keys for the moment, I want to learn to extract ISN correctly , but I'm trying to read with vvdi2 by eeprom file and I only get "FF".... :(

I can do the key file, but the ISN show me is "FF"....

Could you find the correct ISN,pease?

Or, Is it possible that the "ISN" in this Cas3+ had been modified to "FF", or It's corrupt...?

Thanks.

its....: 40E1
Yhoni
18th June, 2023, 11:11 AM
its....: 40E1

Hello friend, this cas3+ is married with edc16 DDE7 0281015240, and I think that the ISN correct sould be 16 bits.

Do you know if these is right,please?

Thanks.
ricked
18th June, 2023, 11:16 AM
Hello friend, this cas3+ is married with edc16 DDE7 0281015240, and I think that the ISN correct sould be 16 bits.

Do you know if these is right,please?

Thanks.

your cas does have short isn

and if its a EDC16C35 its short isn
kiszka
18th June, 2023, 01:16 PM
Hello friend, I donīt want to do keys for the moment, I want to learn to extract ISN correctly , but I'm trying to read with vvdi2 by eeprom file and I only get "FF".... :(

I can do the key file, but the ISN show me is "FF"....

Could you find the correct ISN,pease?

Or, Is it possible that the "ISN" in this Cas3+ had been modified to "FF", or It's corrupt...?

Thanks.
this Cas bo only supports short ISN 40e1, there is no long ISN so you have FFFF
key data saved is a drama
crc in CAS is corrupted
the data you are interested in must be extracted from a working key
Yhoni
18th June, 2023, 02:23 PM
this Cas bo only supports short ISN 40e1, there is no long ISN so you have FFFF
key data saved is a drama
crc in CAS is corrupted
the data you are interested in must be extracted from a working key

Ok friend, thanks for the bad news.... :culpability:

Do you think that this Cas3+ was wrongly modifyed?

I bought a ecu+cas3+key used kit for swap from BMW 330 E83 engine to Nissan Patrol, so do you think that this CAS3+ is not right to work ?

Could you teach me what software should use I to check these problem, please? but I have vvdi2 but It doesīn show me these information.

Thanks.
ricked
18th June, 2023, 04:13 PM
Ok friend, thanks for the bad news.... :culpability:

Do you think that this Cas3+ was wrongly modifyed?

I bought a ecu+cas3+key used kit for swap from BMW 330 E83 engine to Nissan Patrol, so do you think that this CAS3+ is not right to work ?

Could you teach me what software should use I to check these problem, please? but I have vvdi2 but It doesīn show me these information.

Thanks.

here is your file fixed, ori does have wrong short vin