PDA

View Full Version : Nec Programmer



billigkid
19th March, 2010, 12:08 PM
Hello, does anyone have a working Software for nec Programmer??
I have software but with Peugeot 307 seems that an Algo is not implanted correct in software or maybe there are 3 different versions of Algo.

1000 Thanks

Dacha
19th March, 2010, 12:51 PM
:wink: Hello!
My home made nec prog 100 % works!
Pasword:dachas

PAVLOS2
19th March, 2010, 01:02 PM
PASSWORD PLEASE

rabie_m
19th March, 2010, 01:07 PM
thank you plis send pass

juisro
19th March, 2010, 01:08 PM
Hi, friend please pass

Thanks

billigkid
19th March, 2010, 01:28 PM
Yes Thanks but need Password to unrar. these files

a.zorba
19th March, 2010, 01:47 PM
winrar need pass

jokersat
19th March, 2010, 06:32 PM
take this one is full and free tested on my clone nec programmer

:wink:

gepakg
19th March, 2010, 06:40 PM
please pass

regards Gepa

meteor80
19th March, 2010, 07:21 PM
Hi,
pass please.

jokersat
19th March, 2010, 08:24 PM
take this is for free No Mony No honny

:wink:

Putas
19th March, 2010, 08:47 PM
Hi,

i don?t now what the people think! WAY PASSWORD even you send to PM!?

Put your password public or put files without password.

putas

mardude
19th March, 2010, 11:41 PM
:wink: Hello!
My home made nec prog.
Pass, please!
Regards

jokersat
20th March, 2010, 01:49 PM
all my project for nec programmer chose what did you want no mony

:wink:

juisro
20th March, 2010, 02:04 PM
:devil: Thanks very good :devil:

rabie_m
20th March, 2010, 07:24 PM
waaaaaaaaaaaaaaaaaaaaaaaaaaaw is gooooooood

thants mi frend al 3az

tolo986
20th March, 2010, 11:10 PM
:wink: Hello!
My home made nec prog.

pass please

billigkid
22nd March, 2010, 10:25 AM
pass please

Thank you very much !!

But still have a problem

device_name9=Peugeot_307
device_type9=uPD780973
algorithm9=NO
graph_info9=peugeot307.jpg
text_info9=peugeot307.rtf

also in your files there is still Algo =no

any solution for this???

jokersat
22nd March, 2010, 11:32 AM
read your nec uPD780973 and post dump i can help you without software

billigkid
22nd March, 2010, 12:16 PM
Thanks this is all i can read

Readout seems to work but allways Actuall mileage is 000000

saved the file please have a look.

jokersat
25th March, 2010, 01:54 PM
this dump is for bsi or dash


and actuel millage xxxxx

billigkid
27th March, 2010, 11:55 AM
Mileage 320000 from nec in dash

yasser
27th March, 2010, 04:16 PM
So, if this is P307 with nec in Dash and eeprom in BSI, so you have to reset to 0 km, so read it, abnd then give it correct km (write).
Correct km to new one in BSI, and first put bsi in car, then dash and everything must be OK.

Regards.

satplus
28th April, 2010, 08:29 AM
Very good. Thanks.

kankame
2nd May, 2010, 11:15 PM
Great Thanks to jokersat... But how about to build a motorola series eeprom programmer ? Is it hard to make it ?

kankame
6th May, 2010, 09:15 PM
İs it really hard to build motorola eeprom programmer ?

raptors
9th May, 2010, 08:24 PM
Please schematis this pcb.Elements is diferent with my schematic.
Sorry for bad English.

Thanks.

silverneutrino
30th May, 2010, 11:22 AM
thanks for the programmer!!!

n599fbm
31st May, 2010, 01:24 AM
Many Tks Brothers !!


Best Rgds !!,

C.

gerickr
9th June, 2010, 06:16 PM
hello. I need help to program a 2002 ford fiesta board processor nec, TachoPro I have the v2008, but I want to know where to place the cables for this type of processor.

jjas40
13th June, 2010, 07:35 PM
hello
and flash for atmega 16?
thanks

astracube
16th July, 2010, 10:21 AM
pass please.