Dashboard Audi A6 2003 year DEF

[kusasusa]

Hi

I have problem with dashboard VDO , display show DEF.

Address 17: Instruments Labels: 4B0-920-xxx-17.lbl
Part No: 4B0 920 933 G
Component: KOMBI+WEGFAHRS. VDO D14
Coding: 00040
Shop #: WSC 25712
WAUZZZ4B6xxxxx AUZ7Z0Cxxxx

2 Faults Found:
65535 - Internal Control Module Memory Error
00-00 - -
01304 - Radio
49-10 - No Communications - Intermittent

I need solution for this problemI need solution for this problem.

Dump is in attachment , read from vag commander.

Best Regards!

Kusasusa

[Alex789]

You can write enclosed file by commander, readapt key and, then, synchronize ECU/dash. Next, change mileage by commander. The only difference is in software versions D14 / D15.

[mlulic]

You must change transponder chip in the key and adaption key

[aminebot]

Hi

I have problem with dashboard VDO , display show DEF.

Address 17: Instruments Labels: 4B0-920-xxx-17.lbl
Part No: 4B0 920 933 G
Component: KOMBI+WEGFAHRS. VDO D14
Coding: 00040
Shop #: WSC 25712
WAUZZZ4B6xxxxx AUZ7Z0Cxxxx

2 Faults Found:
65535 - Internal Control Module Memory Error
00-00 - -


you have to replace the dashboard

[Alex789]

You don't need to change transponders in the keys and not change dash if you'll find correct dump.
When you upload in eeprom the same version file or change with similar dash, first you release old data by entering old login according appropriate procedure. Then, using own login, you adapt dash to the your vehicle. Your 14th digit im*o code will be transferred into the dash. So, locked chips will recognize im*o.
Check it in enclosed files. They are from the single dash insert.

[ahmadalbeik]

Hi

I have problem with dashboard VDO , display show DEF.

Address 17: Instruments Labels: 4B0-920-xxx-17.lbl
Part No: 4B0 920 933 G
Component: KOMBI+WEGFAHRS. VDO D14
Coding: 00040
Shop #: WSC 25712
WAUZZZ4B6xxxxx AUZ7Z0Cxxxx

2 Faults Found:
65535 - Internal Control Module Memory Error
00-00 - -
01304 - Radio
49-10 - No Communications - Intermittent

I need solution for this problemI need solution for this problem.

Dump is in attachment , read from vag commander.

Best Regards!

Kusasusa


i need the photo of this kilo miter from outside
and from inside showing the ic
i need it very urgent
can some one help me
????????

[borts]

I have a same problem

[M Electronics]

hello, i have the same problem, which happened after replacing vp44. I followed the procedure, started the car without any problems. after a few ignition, this problem appeared, the instrument panel prints fuse and deff. when i read eeprom it was empty..what is the solution, does anyone have any file? the instrument cluster is vdo 4bo 920 933 gx .. Eeprom 93c86