Carpass DVD100 Navi

[marcin55246]

Hi everyone, I have a Delphi-Grundig DVD100 Navi 13190748. Can you tell me what the pin of the radio is?
Also if can you do i wish i want the bin file without pin, i mean deactivated theft protection yet

969476

[carradio2001]

Your radio in Delivery Mode. Your pin was 0524.

BR,
Carradio2001.

[marcin55246]

Thanks man i check it out.
To disable delivery mode i have to push eject button a few second?

[shooting]

Thanks man i check it out.
To disable delivery mode i have to push eject button a few second?

You need pairing PIN from display to use this file.
Also you did not say what is new to your car? Display or Radio?




wbr

[marcin55246]

For now i have display GID three lines 13275077 pairing with CD70 Navi. DVD100 is my new radio. Tried to code with unpaired display and with given 0524 code and nothing happen. It says done, but it is not, still show "display save". I screw up with writing the code, failed 3 times, uploaded eeprom mojedvd100_delivery and now i have to wait security time. Adding old .bin it doing nothing with security time. Pin 0524 seems to be good. When i write this pin then remaining security-code inputs is not count, when i write wrong code it is count. Do you now how much time i need to wait until i can write it again? The same situation is with CIM, once waited 21 hours on ignition after 7 fails of steering angle sensor coding until pin passed.
I had many displays GID/BID and radio CD30 MP3/CDC40 Opera/CD70 Navi/DVD90 Navi and i never had the problem with coding them.
Now DVD100 surpased me... i have my guilt.
I have to wait several days to do it right, don't have time for this now.

969724969726969727969728

[shooting]

For now i have display GID three lines 13275077 pairing with CD70 Navi. DVD100 is my new radio. Tried to code with unpaired display and with given 0524 code and nothing happen. It says done, but it is not, still show "display save". I screw up with writing the code, failed 3 times, uploaded eeprom mojedvd100_delivery and now i have to wait security time. Adding old .bin it doing nothing with security time. Pin 0524 seems to be good. When i write this pin then remaining security-code inputs is not count, when i write wrong code it is count. Do you now how much time i need to wait until i can write it again? The same situation is with CIM, once waited 21 hours on ignition after 7 fails of steering angle sensor coding until pin passed.
I had many displays GID/BID and radio CD30 MP3/CDC40 Opera/CD70 Navi/DVD90 Navi and i never had the problem with coding them.
Now DVD100 surpased me... i have my guilt.
I have to wait several days to do it right, don't have time for this now.

969724969726969727969728

Code given is 100% wrong... you need to post Display for correct PIN
(Your Attachment failed)



wbr

[marcin55246]

Hi, i think i know where the problem is. My china clone OP-COM fails or DVD from Antara isn't fit to Astra H.
Finally my radio back in delivery mode, so i again unpaired my GID and CD70 it restarded correctly and it show |Display save/ beeping sound| and correctly paired with code 0524, works well, no error. Then just replaced the CD on DVD. There was no headline display safe but only beeping sound. I went in the display measurement list and it shows Theft protection: ID O.K./ Security Wait Time: Not Running/ Remaining Security-Code Inputs: 10. The DVD radio measurement list shows Theft protection: Deliviery State/ Security Wait Time: Not Running/ Remaining Security-Code Inputs: 10. Useing Vaux-Com i started activate theft protection, i write display code and appear finished successfull but radio does not restarting, does completly nothing and still beeping. Checking again measurment list and nothing changed.
Is there another problem?
My attachments are photos, don't know why it fails. Today i see when try to upload "You do not have permission to perform this action. Please refresh the page and login before trying again."


https://obrazki.elektroda.pl/6798348800_1687888963.jpg
https://obrazki.elektroda.pl/4356387300_1687889071.jpg
https://obrazki.elektroda.pl/6234168900_1687889129.jpg

970544970543970542

[marcin55246]

I forgot, here is my GID eeprom

[shooting]

I forgot, here is my GID eeprom

This is already paired to radio with 0524
Your mistake was not using CarPass....




wbr

[carradio2001]

Opcom is not doing very well with this. They only use MDI or/and Tech2.

BR,
Carradio2001.

[marcin55246]

This is already paired to radio with 0524
Your mistake was not using CarPass....




wbr


Yes it is paired with CD70. It doesn't matter it is paired or not. My OP-COM can do nothing in both cases. I was not using my carpass, because to pair display and radio i can use a code as i want, just based on the code from second coment. Do am I wrong?
Carpass of my car is 1583 and for the test i used 0524.
For now GID and CD70 have code 1583. For final I always give a code from my own card or code from someone else.





Opcom is not doing very well with this. They only use MDI or/and Tech2.

BR,
Carradio2001.

Now I see. I feared about to operate with CIM/SRS/UEC but i never tought it can't code the stupid DVD radio.



At the end I wish I want to try something. Can You make my file have a 1583 code? I would like to see if the 1583 code uploaded to the eeprom will work without coding

[marcin55246]

Opcom is not doing very well with this. They only use MDI or/and Tech2.

BR,
Carradio2001.

Hi, can you set my dump to virgin?
I am thinking of selling the radio. If I can't code it, it's redundant to me. It's a pity. I was want to add AUX input in it yet but it not impossible for now.

[shooting]

Hi, can you set my dump to virgin?
I am thinking of selling the radio. If I can't code it, it's redundant to me. It's a pity. I was want to add AUX input in it yet but it not impossible for now.


Use this dump and pair using pin from display




wbr

[marcin55246]

Use this dump and pair using pin from display




wbr


Thank you guys, i think i rather dont sell this radio. I know why I couldn't code the radio.
The reason was that someone had UHP and it was blocking the ability to code. I disabled it in MSCAN and for now is ok.
I have three pins of AUX in facra plug so in index code I set to 05101(with AUX in) but it does not appear in menu. What do I need to have an aux tab? A newer software of it? Some stuff on PCB?
By the way serching net I found how to get the PIN from DVD100. It is at the addresses 05C-05F and need to use XOR 95, 3F, 4E, 6A

I hope my attachment won't fail.

971940 971941 971942 971943 971944