Passat EDC17CP20 Immo

[wronapl]

Hello friends from the forum. Can anyone help me on the subject. The car is a Passat B6 2010 with a 2.0 TDI CR 110PS engine. I want to change the ECU - I bought a used one with the same numbers. I am asking for a file with immo disabled without the message IMMO ACIVE or with immo assigned. Attached are the files from the old and the new (used) ECU. Only the ECU is replaced in the car. I tried to disable IMMO with the IMMOOFF17 program - the auto starts, after turning off several DTCs, the glow lamp disappears, but the message IMMOBILISER ACTIVE remains on the dashboard.

[wronapl]

Can anyone help?

[rafal]

why off?
why not clone if was al ok with immo before ?

[wronapl]

If i write INT. Flash and INT.eeprom from old ECU car dont start. Ill try ktag - make backup from old and write clone to new.

[rafal]

If i write INT. Flash and INT.eeprom from old ECU car dont start. Ill try ktag - make backup from old and write clone to new.

will not work like you wrote....................
probably you don't have any knowlage about medc17 m8
forgot about copy/paste in that ecu

[wronapl]

Write clone by ktag also dont work.

[rafal]

Write clone by ktag also dont work.

nothing new................read again what i wrote

[koyot]

vrite solo init eeprom

[wronapl]

Solved by Immobilizer Pincode Calculator site by clone EDC17.