citroen c3 1.1

[pawl]

hello is it possible to get a pin from this dump? no original flash from c3 I want to fit the bsi virgin to the engine controller
iaw 48p2.7c
hw16.623.004
hw9645989480
sw16.616.024
sw9646569380
magnetimarelli
citroen c3 1.1

[newone]

hello is it possible to get a pin from this dump? no original flash from c3 I want to fit the bsi virgin to the engine controller
iaw 48p2.7c
hw16.623.004
hw9645989480
sw16.616.024
sw9646569380
magnetimarelli
citroen c3 1.1
Hello,try EVHI...............

[elektronik325]

Yes, it won't work. If you don't have a flash with ori ecu, it doesn't make sense. Read the bsi and take the code from the bsi, you will have remotes if it has. And make engine ecu virgin. And then add. The engine ecu pin itself, since it is not with the car, will not give you anything. Best regards

[pawl]

I've already done the virgin in this case it's not ok I can't enter the configuration I have a different ecu I know I'll lose the remote I'll get a new key it's not a problem

[pawl]

hello I'm stuck with this c3, I've tried different ways and nothing works, would it be possible to do an immo off from this file?
regards

[the_big_d]

Hello,try EVHI...............

As far as i know PSA pin codes never contain the letters I or O??

[pawl]

I have determined that it is L *6c *