DTC off please...

[ksts1983]

The errors are:
P1570
P1612
Is there any option to delete the P codes?

[arabtyrant]

VAG ? ECU NUMBER ?
CAR YEAR ?

[tato10]

The errors are:
P1570
P1612
Is there any option to delete the P codes?

DTC removed, pass after tanks and reputation.

[Antonio266]

P1612 - Engine Control Module Incorrectly Coded
P1570 - Engine Start Blocked by Immobilizer

You can't solve this with DTC off.

[mathijshee]

The errors are:
P1570
P1612
Is there any option to delete the P codes?

ECM needs recode

[ksts1983]

VAG ? ECU NUMBER ?
CAR YEAR ?

audi a3 1.6tdi 2015
Control Module Part Number: 04L 906 056 D
Component and/or Version: R4 1.6l TDI H06 2372
Hardware number: 04L 907 445 B
DELPHI DCM 6.2V

[ksts1983]

P1612 - Engine Control Module Incorrectly Coded
P1570 - Engine Start Blocked by Immobilizer

You can't solve this with DTC off.


What else to do?
This ECU does not support immo off.

[ksts1983]

ECM needs recode

Can't recode.
This ECU is from AUDI A3 1.6tdi 6speed manual 110HP 2015 and will work on SKODA Octavia 1.6tdi 2018.
The official dealer triyed to adapt immo, but couldn't because the immos generation (gen 5 to gen 6 immo, as told me).

I dont know what else to do.

[Antonio266]

If old ECU is still available and readable, you can Clone it in Boot Mode, there a few Tools capable of it: Flex, CMD, FGTech.
If it's not readable you need a brand new ECU or a used one with same HW and SW, and adapt it with ODIS Online.
After has been adapted, it also needs to be coded, that's why you have those 2 faults.

[ksts1983]

If old ECU is still available and readable, you can Clone it in Boot Mode, there a few Tools capable of it: Flex, CMD, FGTech.
If it's not readable you need a brand new ECU or a used one with same HW and SW, and adapt it with ODIS Online.
After has been adapted, it also needs to be coded, that's why you have those 2 faults.

The old ECU is available yes.
But..... look what we want to do.....

Customer have a Skoda Octavia 1.6tdi 116hp 2018 with 5speed manual gearbox.
Recently (because of a gearbox problem) procced to a 6speed manual gearbox swap from AUDI 1.6tdi 110hp 2015.
The problem is that the skoda ecu can recognize the 6th gear.
The result was that the cruise control doesn't work properly, start/stop fault, errors apears for the ABS unit, the neutral gear position, ect.
We tried to coding ECU via VCDS, ODIS, VCP, but the ECU reject the coding.
So, he bought an ecu from an AUDI 1.6tdi 110hp 2015 that runs with 6 speed gearbox, in order to adjust the immo through an official dealer.
Moreover the 5speed ECU and the 6speed ECU have diffirent torque maps. The engine now can't manage properly the 6speed torque.

Unfortunately, the DELPHI ecu doesn't support immo off, even give us the option of read.
Official dealer tryied to adapt immo but no luck. There is a difference between ECU immo 5 and cars immo 6, as he told us.

So, i'm trying to help him and look for a solution.
I was thinking that making DTC OFF, the engine will start.

What else to try????

[ksts1983]

DTC removed, pass after tanks and reputation.

Sorry but the file you send me back is not mine.
Please check it again.

[PDXAutoworks]

The errors are:
P1570
P1612
Is there any option to delete the P codes?

here is dtc off as you requested

[Antonio266]

Really guys? You're all wasting time trying to make DTCs off on a DCM6.2V replaced with an used one thinking it's Plug&Play?
There's Immo involved, that car will never start.
I already told you how you can solve it.