EDC15P+ 019PE Checksum

[Andytech3]

Hello, could someone fix the checksum on this map for me? Many thanks .

[marko6jpt]

Hello, could someone fix the checksum on this map for me? Many thanks .


checksum is ok ;)

[Andytech3]

Can you then advise me why the ecu "doesn't live" after uploading (either via k-line or via the flash programmer after desoldering)? However, this map is original from the given ecu.

[ombre57]

hello did you write until the end and with what tools because your checksum is good but manage to read with mpps and at the time of writing it no longer works and no way to read after the computer but the car has started all the same

[Andytech3]

Initial reading was done via FGTech Galletto 4. Subsequently, after turning off the EGR, recording failed at 90%. Next, I desoldering the flash and loaded the SW there via an external flash programmer (the ecu didn't work / didn't communicate). Then, after desoldering the flash, I uploaded the original file there again, again with no response. I would like to save the map because the car was perfectly tuned with it (perfect consumption and performance). At the moment, when I put another ECU there and upload the serial map for the given engine, the engine pulls like HTP and the consumption at idle is 2.5l/h (which leads me to think that the engine has been modified more deeply (different injections and the like...) )

[Andytech3]

Why does every map (whether original or downloaded from the Internet) for 038906019PE give me this message when opened in VAGEDC Suite? ..... If I upload any map for another EDC15P+ to the ecu, the ecu works. As soon as I upload the map there (whether original or downloaded from the Internet) for 019PE ecu does not live.
973896
At the moment, I made an "adapter" for quick swapping between the ECU and the Flash Programmer, so if you have any ideas what to try or how to upload the map for 019PE to my ECU, it can be quickly tried without desoldering and soldering :D
973900

[morgano]

Do you have working backup of the ecu when it started the car last time?

Which engine code is the alhambra?

None of the alhambra file i have match your ecu numbers

Try this AJM dump.

Have some Dumps from 115hp alhambra.

[Andytech3]

Do you have working backup of the ecu when it started the car last time?

Which engine code is the alhambra?

None of the alhambra file i have match your ecu numbers

Try this AJM dump.

Have some Dumps from 115hp alhambra.

In my very first message above, there is the original file from the time when it was still starting.... after uploading it to the ecu, it neither communicates nor starting engine.


The engine code is BVK, the car's year of manufacture is 2008, it's the last revision EDC15P+, it even has two "plus" in the name, it's EDC15P++


I'm starting to think if they didn't try to add encryption like in EDC16, which was the next generation


When I upload the file for Alhambra 115hp, the engine does start but has absolutely no traction and the consumption at idle is 2.5l/h

[morgano]

In my very first message above, there is the original file from the time when it was still starting.... after uploading it to the ecu, it neither communicates nor starting engine.


The engine code is BVK, the car's year of manufacture is 2008, it's the last revision EDC15P+, it even has two "plus" in the name, it's EDC15P++


I'm starting to think if they didn't try to add encryption like in EDC16, which was the next generation


When I upload the file for Alhambra 115hp, the engine does start but has absolutely no traction and the consumption at idle is 2.5l/h


Your file is not original, its already modded.

Try flashing this original and see if van starts and works properly.

[kiszka]

In my very first message above, there is the original file from the time when it was still starting.... after uploading it to the ecu, it neither communicates nor starting engine.


The engine code is BVK, the car's year of manufacture is 2008, it's the last revision EDC15P+, it even has two "plus" in the name, it's EDC15P++


I'm starting to think if they didn't try to add encryption like in EDC16, which was the next generation


When I upload the file for Alhambra 115hp, the engine does start but has absolutely no traction and the consumption at idle is 2.5l/h
share the modified file

[morgano]

share the modified file

@kiszka (https://www.digital-kaos.co.uk/forums/member.php/69387-kiszka) modfile is in first post

[alonedark]

you have socket for put and remove for 29fxxx too ,

[Andytech3]

Your file is not original, its already modded.

Try flashing this original and see if van starts and works properly.

yes, and for the reasons mentioned above, I would like to keep the modified file

[Andytech3]

you have socket for put and remove for 29fxxx too ,

yes, I have a 29FXXX memory programmer

[morgano]

yes, and for the reasons mentioned above, I would like to keep the modified file

Keep what you want then. A file that is not working. Good choice.

[Andytech3]

[QUOTE=morgano;4582244]Ponechajte si, čo chcete. Súbor, ktorý nefunguje. Dobrá voľba.[/CITÁT]

áno, celé toto vlákno je o záchrane súboru, ktorý bol pôvodne v ECU a fungoval a ani po vyčistení a opätovnom nahraní nefunguje, súbor od vás po nahraní do ECU nefunguje (nekomunikuje / nespustí sa (iba je vypnutý v eeprom)) hecu's uploads to the ecu's in the ecu is the well)(by other software I mean maps for other 1.9TDI engines with different numbers than the original 019PE)

[kppow666]

974793 try it file cs ok