valenmanza
19th July, 2023, 10:31 PM
Hi, good, I am modifying an ibiza cupra 1.8t 20vt 156cv file and I want to install a mechanical tap to control turbo pressure (with afr probe) but I try to increase pressure limiters and limp mode comes on very quickly and the pressure remains at 0.3. I can't get it to go above 1.1 bar without limp mode going off, it has a turbo k03s hybrid front intercooler and 314cc injectors. Attached file Stage 1 launch control and NLS and the same with the "limiters" that I found.