MACK TRUCKS

[hercamp]

so here is the Vmack software diagnostic

in this links most be the 2.6.12 vertion to vmack II vmack III
links are working enjoy and dont forget thanks.
enjoy

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/193648666/VMACSS_V2.6.12.part1.rar)
RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/193653021/VMACSS_V2.6.12.part2.rar)

[infoitpro]

is it support nexiq usb ?

[hercamp]

nexiq magic key...but I dont remenber If works with usb link...I think thats posible

[infoitpro]

only support noregon usb do you have new vmack 2006 -2008 ...

[hercamp]

I have the last vmack but dont forget that mack trucks change the diagnostic sw for vcads pro in the vmack IV vertion.

[brucex78]

hello, can anyone share VMACK software???

Thanks in advance

[koba30]

Works Nexiq blue-link, and usb-link but install first usb-link drivers then blue-link drivers.

[diesel-tech]

vmack software works good with magikey pdm,lite link but does not work well with usb link, other adapters that work good are norgon, DG 4, spx, cummins inline, ic4, kentmore all tested and working 100%

[softguy09]

hello, can anyone share VMACK software???

Thanks in advance

Why dont you just Use Vcads to do the mack trucks bud?

[hercamp]

hello, can anyone share VMACK software???

Thanks in advance
but is... in the firts post!!!!!

[peter21]

hi someone know what program is neded for change parameters in mack engine..... I have Vcads Pro but nor appear the option to change parameters.

thanks in advance

[hercamp]

thats ..depend ....wich parameters are u trying to change and wich vertion of engine ....vmack II,III with vmack stw....works different to vcads pro..and vcads lite

[peter21]

hi buddy, thanks for answer.... in other post i see about crack for Vcads pro. that was my problem, now i can see the option to change parameters but when i try to change parameters appear problem 100 and i think is for mi Vcads whit out original key.

[peter21]

hi, one more thing buddy.. have you diagram Vmack II/II/IV?
thanks in advanced. :rock: :thrasher:

[hercamp]

yeah I have but in these days I can upload because optic line that connect the enternet in my city is cut off....I dont now how mnay more days we ll be with 20kb/s....thats very slow to upload the dvd diagrams .....cover 2000 until 2008 macks....be patient .,...

about vacds pro ...maybe you ve seen that u cant change parameters with sult@n all vertion crack....wich vertion of vmack you are trying to work?

[peter21]

well, I working in V-mack III I want to disabled the idle shutdow, and change tire size. but with Vcads Pro i can't do this because i have Sultan's crack...... I see you V-mack software but i can't make recognize my nexiq usb link. :(:(

[hercamp]

about vmack !!! you cant connect to vmack III because works only with vmack service stw.and serial port comms....from vmack IV works with vcads.....and works with usb link....

[dssdom]

messed up a reply... ( edited )

[dssdom]

so here is the Vmack software diagnostic

in this links most be the 2.6.12 vertion to vmack II vmack III
links are working enjoy and dont forget thanks.
enjoy

RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/193648666/VMACSS_V2.6.12.part1.rar)
RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/193653021/VMACSS_V2.6.12.part2.rar)

Does this need A KeyGen At all?

[jtr8178]

Does this need A KeyGen At all?

Downloadling now to find out.....

[Louie]

Does anyone have Vmack IV I use my Nexiq usb for pretty much everything and it would be great to be able to use it for vmack aswell.

Thanks

[hercamp]

vmack IV only possible to test with vcads pro...or vtt/ptt softwares

[mecmack]

good night, as are friends, I wanted to ask you a question, I need to know if there is any way to change the value of rpm EECU factory in programming, since I have a truck that I'm repairing a CX612, but I realize that in EECU parameters of which has a maximum of 1750 rpm and here in Venezuela will take about 2100 rpm or more. My question is whether there is any way to increase this value for rpm. Thanks and I hope answers. best regards

[dieseldocter]

hi guys
anyone help with link to v-mac 3 software

thanks in advance

[tres8]

can someone please help me or show me the way to remove the passw ord okay what I'm trying to do I'm trying to change the speed limit from 65 to 80 and when I change the settings ask me for a password I'm using the volvo v cads pro I really need anyone to help I will preciate anybody out there thanks I'm working on the 98 model mack truck with E7-300

[han2542]

can someone please help me or show me the way to remove the passw ord okay what I'm trying to do I'm trying to change the speed limit from 65 to 80 and when I change the settings ask me for a password I'm using the volvo v cads pro I really need anyone to help I will preciate anybody out there thanks I'm working on the 98 model mack truck with E7-300
did you try all the zeros (0000) most of the time thats what they have by default let me know if that helps
please dont forget to push thanks

[sogaro]

Who knows if i can get my Cardaq Plus to work with this software?

[tres8]

thanks for trying to help me mister jan2542 but I still have no luck
already tried the 4 6 8 siro I'm wondering is it some kind of special program to do this if someone know the trick please let me know or show me . and again thanks in advance for the help :rolleyes:

[p455w0rd]

Hi everyone i have the vmac program but i also have the usb link but im not able to remote to the computer of the truck. please help me with that

[jctech]

Hi everyone i have the vmac program but i also have the usb link but im not able to remote to the computer of the truck. please help me with that

See this thread by Hanzem EVR

http://www.digital-kaos.co.uk/forums/f166/v-mack-diagnostic-sw-n-usb-issue-fix-259368/