polo 6r 1.2 tdi not starting after dtc off

[mimed]

polo 6r 1.2 tdi 75 delphi 3.7 not starting after dtc offi write the original file, its not starting
i use foxflash in obd mode
what i can do :(

[wjgud123]

what i can do :(


stop using cheap clone tools to work with customer cars....

post file, can look on it

[antonis132]

Flash ecu with odis E or thinkdiag

[gwiazdamb]

polo 6r 1.2 tdi 75 delphi 3.7 not starting after dtc offi write the original file, its not starting
i use foxflash in obd mode
what i can do :(

Even the original tool can do a bad job and brick the ecu
No tools are 100% safe .It depends on how we use these tools
If we go for the easy OBD it ends up failing to start


It is best if possible to make a full backup copy before reading the OBD
It is possible that the eeprom was damaged during the write
Having a backup, we can restore the factory state of the ecu and after the problem

Contrary to appearances, reading and writing OBD is not safe

Maybe this will help everyone who thinks that pressing ENTER and after the problem