adblue reset ford transit sid211

[dzejkoff]

Hello anyone know how to clear adlbue warning message, I have code U040F in ECM try to reset adblue I test couple options with no luck, I try reset warning message and write adblue off but before write adblue off I need clear message.

Thanks for advise.

[Aladinnu]

what tool did u use ? what faults do u have? some faults don t let u reset adblue. specialy if they are permanent.

[dzejkoff]

I Have topdon phoenix elite and dtc code U040F it always comeback

Dtc message "incorrect data received from the fuel additive control module"

[xenon74]

hi and what fault do you have in the additive calculator

[lsdlsd88]

normally unplug module and write off file. no reset necessary

[Aladinnu]

I Have topdon phoenix elite and dtc code U040F it always comeback

Dtc message "incorrect data received from the fuel additive control module"

that means either adblue ecu is bad, either comunication line with it is faulty. after reset check live data and see if values are ok. if they are not changed to 0 or "remaining km until...." is at least 100km ...reset didn t work. in this case u will need manual solution or reset from eeprom.