Audi A4 3.0 TDI EDC16CP34 Hardcut Limiter problem

[Tuningfreak86]

Hello friends, I would like to drive a Hardcut Limiter on my Audi A4 3.0 TDI with ASB engine, preferably with flames, but I have a problem, I can't get the programming right, I have an automatic transmission and I think there will be problems with it?


Control unit is an EDC16CP34


I've already tried the torque limiter, but unfortunately it doesn't work, the same with SVBL.


Can someone help me?


Once the file that I tried to make a hardcut, and once without.



thank you for your time :)

[bogdanwmw]

SVBL=single value BOOST limiter.....

[Lusitano94]

It'snt on SVBL but you must modifiy SVRL

[Tuningfreak86]

sorry i mean svrl :-) dont work, have you a any idea? or solution for me?

i think the transmission make a problem?

[bogdanwmw]

yes...problem with transmission..my opinion

[lsalt100]

I've already tried the torque limiter, but unfortunately it doesn't work, the same with SVBL.

as I see U only changed the 1st codeblock (for manual transmision), second codeblock start from 1C0000, so U need change SVRL also there....

[Lusitano94]

Yes you must change all codeblocks to work because first codeblock is for manual transmission

[Tuningfreak86]

Hello friends, I'm starting to think I'm a spider :-) can one of you take over the SVRL from manual shifting to the automatic map? I've tried but he still won't...

[vectrac20tsri]

Try this and report back, quick edit in hxd as on my 2nd laptop but the 2 block SVRL appears to be at 0x1D2908.

[Tuningfreak86]

thank you i will test and report :)

[Tuningfreak86]

Unfortunately it doesn't work, in neutral gear it only manages a speed of about 3,900 - 4000 rpm and then it regulates itself when idling. If you drive and switch gears, e.g. 1 gear to max speed, it starts shaking slightly before shifting up the gear.