Kurtkoeln
21st August, 2023, 10:15 AM
Hello, please need help.
If I insert the card with the old transponder into the reader that was in the card when it was purchased, I get this message here.
433 MHz, but I can neither open nor close nor turn on the ignition.
If I do the same now with the transponder from Aliexpress I get this message here.
315 MHz, but I can neither open nor close but turn on the ignition.
If I use the transponder that I bought from the German specialist shop and put it in the card and then in the reader I get this message here.
I use these cards now
and say I forego the Keyless Go and put these cards in, I also get this message here.
Do I have to deactivate the Keyless Go in the system beforehand?
Any idea or guess where the problem is?
Driver's door is open.
Light, ventilation, radio, etc. are switched off.
I managed to get the red x gone, but when I select Extra, Keys, and then the UCH for Espace 4 Ph. 2 and then click on Read Pin, I get the message Character spacing is invalid and can not be removed.It doesn't matter which OBDLink SX probe I use, whether it's from ChinChan or from the German shop, which is also listed on the manufacturer's website, what's the problem?How can I add maps to Espace IV without Keyless go?
do I have to deactivate the keyless go in the system?
Lg. Kurt
If I insert the card with the old transponder into the reader that was in the card when it was purchased, I get this message here.
433 MHz, but I can neither open nor close nor turn on the ignition.
If I do the same now with the transponder from Aliexpress I get this message here.
315 MHz, but I can neither open nor close but turn on the ignition.
If I use the transponder that I bought from the German specialist shop and put it in the card and then in the reader I get this message here.
I use these cards now
and say I forego the Keyless Go and put these cards in, I also get this message here.
Do I have to deactivate the Keyless Go in the system beforehand?
Any idea or guess where the problem is?
Driver's door is open.
Light, ventilation, radio, etc. are switched off.
I managed to get the red x gone, but when I select Extra, Keys, and then the UCH for Espace 4 Ph. 2 and then click on Read Pin, I get the message Character spacing is invalid and can not be removed.It doesn't matter which OBDLink SX probe I use, whether it's from ChinChan or from the German shop, which is also listed on the manufacturer's website, what's the problem?How can I add maps to Espace IV without Keyless go?
do I have to deactivate the keyless go in the system?
Lg. Kurt