pug 206 1.4 immo

[busaman]

2000 pug 206 1.4 immo does anyone have immo off for a sagem s2000 ecu.

ive got one with bad ignition drivers.

[benci1982]

2000 pug 206 1.4 im*o does anyone have im*o off for a sagem s2000 ecu.

ive got one with bad ignition drivers.

what the ECU number??
sagem s2000 or sagem s2000-pm1???

[busaman]

i will look in the morning.

[busaman]

it is sagem s2000-23 if you need it i will get dump. but it would be easier to load a file ro another ecu.

[benci1982]

it is sagem s2000-23 if you need it i will get dump. but it would be easier to load a file ro another ecu.

try this dump :

[busaman]

I have just opened the back and its full of glue (shit) where on the board is the eprom to avoids cutting the whole lot.

or is it possible via obd

[benci1982]

I have just opened the back and its full of glue (shit) where on the board is the eprom to avoids cutting the whole lot.

or is it possible via obd

not possible via obd

[busaman]

Do i need to cut imo line if so which one.

[ricards99]

no cut, i do it in 106 206 and 307 and work fine with no default in diag

[busaman]

right done it the first two times it started so i ran a scan to see if there were any previous fault codes stored the only one was p1612 no start code save after that it would not start.

[benci1982]

right done it the first two times it started so i ran a scan to see if there were any previous fault codes stored the only one was p1612 no start code save after that it would not start.


do not have the original eeprom?

then try this:

[busaman]

do not have the original eeprom?

then try this:


yes i have it but its in the old ecu embedded in rubber.

[benci1982]

yes i have it but its in the old ecu embedded in rubber.

if you have the old ECU, remove the eeprom from it and put it into the new

[busaman]

ok i will try the other file first i was trying to avoid taking it out it took me an hour to un cover it.

[Meat-Head]

ok i will try the other file first i was trying to avoid taking it out it took me an hour to un cover it.

Don't worry we have day's like that as well.

[busaman]

i have compared 3 different immo files for this and they have vast differences, is there a specific part where the immo is stored i am useless at hex but there must be a pattern of some sort. i really would like to learn

[busaman]

well good and bad news i got the original chip off but it was stuck to the board with glue and it broke off pin 4 and i cant read it now and the other file starts it only twice. got a bad feeling about today.:help:

[busaman]

does anyone have ecu pinout for immo wire autodata does not show it.

[benci1982]

does anyone have ecu pinout for im*o wire autodata does not show it.

terminal A-brown, pin A3f, A4f,

[benci1982]

you know the login code for the car???

[busaman]

PIN IS Q9V6

[benci1982]

try this......

[busaman]

Thanks for that.....

Programmed the chip and it now won't start at all.....

Removed the chip and it runs without a chip fitted but only revs to 3200rpm.....

Strange..... :dontknow:

[benci1982]

Thanks for that.....

Programmed the chip and it now won't start at all.....

Removed the chip and it runs without a chip fitted but only revs to 3200rpm.....

Strange..... :dontknow:

then login code is bad

I saw that you gave the wrong VIN number, definitely good for the login?

[busaman]

yes sorry the MOT certificate had the wrong vin numbers on it i will get the correct pin tomorrow i hope.

[benci1982]

yes sorry the MOT certificate had the wrong vin numbers on it i will get the correct pin tomorrow i hope.

ok, reversed write as soon as I can

[busaman]

ok, reversed write as soon as I can


it seems Q9V6 was the correct pin code.

[ricards99]

try this dump it's fine for me, i tested it and works all days in 206 1.4 of my friend

[busaman]

do i need to cut any wires.

[benci1982]

try this dump it's fine for me, i tested it and works all days in 206 1.4 of my friend

immo killer you used it???? :) This version is for me not a operate!

[busaman]

Almost all stert the car once but if you turn it off for 30 seconds it wont start again and the dump has been rewritten from the bsi .

[busaman]

fixed at last it turns out that you must cut BOTH immo wires A3f and A4f one will not do it (dont know why) its all good now.

thanks to everyone espeicially benci1982 for all your input
the dump i used was from ricards99

[Meat-Head]

fixed at last it turns out that you must cut BOTH immo wires A3f and A4f one will not do it (dont know why) its all good now.



Dumb question, although by now you just want the customers money, can you still do a diagnostic scan if engine light comes on?

[busaman]

yes the light funcions correctly and all live data is there and you can erase dtc.s

[Mac Gyver]

immo off please.

[russell]

what are you using to read and write to this ?
Russell

[Mac Gyver]

I used the TELNEC SEEPROG .
have any errors in the file?

[Mac Gyver]

I did mess when naming the file, the ECU is PSA VALEO not SAGEM.