Please Help Fiat Ducato EDC15C7 Immo Off, U1600,Chks 0281 010 486

[painkillergtx]

Can everybody help with Fiat Ducato
Bosch EDC15C7
0281 010 486
need Immo Off with U1600 and good Cheksum

Thanks in Advance.....:encouragement:

[Hayssam1]

Can everybody help with Fiat Ducato
Bosch EDC15C7
0281 010 486
need Immo Off with U1600 and good Cheksum

Thanks in Advance.....:encouragement:

Try this file
IF I HELPED YOU, PLEASE REMEMBER TO PRESS THANKS

DTC OFF u1600 + checksum ok

[painkillergtx]

sorry friend, thats without U1600 or?

[rafal]

sorry friend, thats without U1600 or?
here off + u1600 off + checksum ;)

[Hayssam1]

sorry friend, thats without U1600 or?
sorry i forgot i corrected now you can download again DTC OFF u1600 + checksum ok

[painkillergtx]

Hi Rafal...password ?

[Hayssam1]

Hi Rafal...password ?

did you try my file ??

[painkillergtx]

Yes i check it tomorow...

[painkillergtx]

sorry dont work...

[painkillergtx]

sorry dont work...

[rafal]

Hi Rafal...password ?

Look pm .............

[gwiazdamb]

sorry dont work...

It is very easy to disable immo
It is enough to change two addresses to make a checksum and the engine must start
Dtc u1600 report only check but does not block the engine start, so it is not a condition that must be met for the start
To sum up, 2x 42 out of 40 and check sum are enough to start. The rest is cosmetic
You probably have another fault in your aucie
Hayssam1 The file is ok
Rafał file but don't expect miracles
Disconnect the immo box

[painkillergtx]

Thanks, unfortunately the ECU was brought to me like this, I don't know if it works.
With kess I can read them without an eprom, but maybe there is another error,
maybe the eprom is not ok either.

Does anyone have a working eprom?

[kiszka]

Thanks, unfortunately the ECU was brought to me like this, I don't know if it works.
With kess I can read them without an eprom, but maybe there is another error,
maybe the eprom is not ok either.

Does anyone have a working eprom?
read eeprom ecu and send on forum

[painkillergtx]

Here eprom from ECU...

[kiszka]

Here eprom from ECU...
https://mega.nz/file/Mm4gVLyL

[painkillergtx]

kiszka your file works....Thanks!
I thing the file from Hayssam is also ok,
the customer has not unplug the Immo Box, and the bytes come back....

Thanks for help!!