View Full Version : Peugeot Boxer DCU102 P1306 - problem
neemo1
10th September, 2023, 05:15 PM
Hello!
I have a problem with removing error P1306. I created the file as VIRGINE but nothing helped. Can someone help me and remove this error from the error table?
PEUGEOT BOXER 2008y
VISTEON DCU-102
Thanks for help!
gwiazdamb
10th September, 2023, 07:20 PM
Hello!
I have a problem with removing error P1306. I created the file as VIRGINE but nothing helped. Can someone help me and remove this error from the error table?
PEUGEOT BOXER 2008y
VISTEON DCU-102
Thanks for help!
Adapting the high pressure pump and injectors should solve the problem of DTC P1306
The injectors must be in good condition to perform the adaptation
Removing the p1306 DTC is cosmetic I do not recommend
The problem will be unstable fuel pressure and fuel dose, which may damage the engine in further use
neemo1
11th September, 2023, 06:32 AM
I tried to adapt the pump and injectors, but it didn't work. I probably have a damaged ECU and I just want to turn off this error.
neemo1
11th September, 2023, 01:52 PM
I did it, thanks for help!
neemo1
13th September, 2023, 02:32 PM
I remove P1306 but now I have P0000 :grumpy:, can anyone help me?
sdtsedat
13th September, 2023, 04:18 PM
bad dtc off gived P0000 you need disable dtc in table and canbus line.
neemo1
13th September, 2023, 06:53 PM
Can you help me clear this DTC?
JonyW
14th September, 2023, 05:32 PM
Try this, pass pw
984817
neemo1
14th September, 2023, 05:44 PM
Does not work, further p0000:ambivalence:
JonyW
15th September, 2023, 04:56 PM
Your file is corupted. Upload this file and check the adaptation of injectors and injection pump and it must work!
984972
pass same
neemo1
15th September, 2023, 08:08 PM
It works, no fault, Thank you very much for help!!!!!!!.
poity
15th September, 2023, 08:50 PM
This is not VIRGIN file!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.