Peugeot Boxer DCU102 P1306 - problem

[neemo1]

Hello!

I have a problem with removing error P1306. I created the file as VIRGINE but nothing helped. Can someone help me and remove this error from the error table?

PEUGEOT BOXER 2008y
VISTEON DCU-102

Thanks for help!

[gwiazdamb]

Hello!

I have a problem with removing error P1306. I created the file as VIRGINE but nothing helped. Can someone help me and remove this error from the error table?

PEUGEOT BOXER 2008y
VISTEON DCU-102

Thanks for help!
Adapting the high pressure pump and injectors should solve the problem of DTC P1306
The injectors must be in good condition to perform the adaptation


Removing the p1306 DTC is cosmetic I do not recommend
The problem will be unstable fuel pressure and fuel dose, which may damage the engine in further use

[neemo1]

I tried to adapt the pump and injectors, but it didn't work. I probably have a damaged ECU and I just want to turn off this error.

[neemo1]

I did it, thanks for help!

[neemo1]

I remove P1306 but now I have P0000 :grumpy:, can anyone help me?

[sdtsedat]

bad dtc off gived P0000 you need disable dtc in table and canbus line.

[neemo1]

Can you help me clear this DTC?

[JonyW]

Try this, pass pw
984817

[neemo1]

Does not work, further p0000:ambivalence:

[JonyW]

Your file is corupted. Upload this file and check the adaptation of injectors and injection pump and it must work!
984972
pass same

[neemo1]

It works, no fault, Thank you very much for help!!!!!!!.

[poity]

This is not VIRGIN file!