citroen xsara 14hdi immo off

[cseko]

Hi. I have a citroen xsara 1.4hdi with broken ecu edc16c3. I bayed and used ecu and i need delete immo. I tryed with immotool and many soft but dont working. I get dtc always P1505 Impact detection Impact information sent by the air bag.
Please help me!
thx.

ecu no: 0281 010 707

[Hayssam1]

I think and if you deactivate the immobilizer you still have problems because the plug connection from the engine control unit
I think this is where the error lies or some plug in the fuse box bsi has no contacts or a cable break

[Hayssam1]

Hi. I have a citroen xsara 1.4hdi with broken ecu edc16c3. I bayed and used ecu and i need delete immo. I tryed with immotool and many soft but dont working. I get dtc always P1505 Impact detection Impact information sent by the air bag.
Please help me!
thx.

ecu no: 0281 010 707


immo off ..........

[Bllinda]

Try .... .... QD3T ;)


Hi. I have a citroen xsara 1.4hdi with broken ecu edc16c3. I bayed and used ecu and i need delete immo. I tryed with immotool and many soft but dont working. I get dtc always P1505 Impact detection Impact information sent by the air bag.
Please help me!
thx.

ecu no: 0281 010 707

[cseko]

immo off ..........



Thx but this solution dont working. It is a EDC16C3 ecu and your solution work EDC16c34 only.

[cseko]

Try .... .... QD3T ;)

I tried rewrite my pin code in ecu but dont working. I think immotool calculated wrong. My original pin: 6VF0
If you can please write it to my dump. This is my calculated dump with immotool but dont working.

[Hayssam1]

this solution working I think you have other problems with the car

check the voltage supply to the control unit

[kiszka]

I tried rewrite my pin code in ecu but dont working. I think immotool calculated wrong. My original pin: 6VF0
If you can please write it to my dump. This is my calculated dump with immotool but dont working.
if it is not pin 6VF0, I need the original ECU or BSI eeprom reading
In the first ECU file you have inserted there is the QD3T pin

[cseko]

if it is not pin 6VF0, I need the original ECU or BSI eeprom reading
In the first ECU file you have inserted there is the QD3T pin

This is a second hand ecu. I send the original bsi dump inside 6VF0 pin.

[Bllinda]

Try .... :) ....

[cseko]

Try .... :) ....

Dont working...