8T0907115A MED17.5 Bricked

[Mart92]

Hi all

can you any help me with bricked ecu?

i read ecu via obd with FGtech and generated 2mb file..
next i write file via obd and pc freeze (ecu is bricked)
yes i'm idiot

friend send me original fabric file (1,46MB), i write it to ecu via fgtech on bootmode,
write ok, but ecu doesn't work.
if i read flash via pcmflash afer correctly read say's failed to verify checksum

A5 1.8tfsi
ecu 8T0907115A

thank's

sorry for my bad english

[brobble]

Before you wrote with bootmode you made a full read? It´s easier to repair the damaged read. Try to flash the file in attachment with pcmflash. This is extracted frf container to bin. PCMflash should be able to handle it. If this doesnt work, post a full read with eeprom from boot- or benchmode.

Good luck.

Greets MR...

[Mart92]

thank for reply

this is full read in bootmode

but before i read this i write other flash via pcm

if i write your file via pcm pc says bad checksum

[brobble]

I mean write with pcmflash by obd!

Greets MR...

[Mart92]

first write via obd with fgtech :/

[brobble]

Write this with bootmode!

Good luck.

Greets MR...

[Mart92]

Car start.. thank you very much

on car was pop-bang, launch control and stage 1 chip and i need turn off swirl flaps..
can you help me with this?
Not for free