View Full Version : Simos 3 dtc off
luci01
18th September, 2023, 08:17 PM
Hello
I need dtc P0401 off in siemens Simos 3PE vag.
Thanks
brockmoortuning
18th September, 2023, 08:28 PM
HERE YOU GO
let tool correct checksums :)
luci01
18th September, 2023, 09:29 PM
Hello
Thanks for this file.I am going to write the chip directly in the programmer and solder it. The programmer does not correct the cks
luci01
19th September, 2023, 05:15 PM
Hello guys, who can correct the checksum in the dtc off file of the rockmoortuning above?
volodin69
19th September, 2023, 07:52 PM
Need to import it in winols and tweak it before and after, in order to be recognized as a map. Other way, your external programmer will write what you give it and the result will be a nonstarter.
Also, i am not sure the egr dtc was done correctly on your file.
What other ecu tools do you have there? Not external programmers...
luci01
19th September, 2023, 10:38 PM
Hello, I have followed your advice and I have made cks with Winols, everything seems ok but the file has me worried, because you think that the DTC off is not correct. The problem is that I don't have the car to test, I only have the ecu. I have attached the file cks ok.
fakturnii
20th September, 2023, 01:44 AM
Hello, I have followed your advice and I have made cks with Winols, everything seems ok but the file has me worried, because you think that the DTC off is not correct. The problem is that I don't have the car to test, I only have the ecu. I have attached the file cks ok.
in your file P0401 is disabled
brockmoortuning
20th September, 2023, 10:13 AM
you asked for p0401 to be disabled and thats what got done :) only just seen this would of corrected chks for you but you have already done it now :)
volodin69
22nd September, 2023, 01:23 AM
Test on the car first. And come back if other egr related dtcs came.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.