Xsara Picasso 2006 SRS Clear

[teerak2uk]

Hi Guy

could someone check this dump and clear the crash data from it


many thanks

[gezame]

Hi
Your file seems ok, no crash data.
This file seems to have been modfied, please, post crash uncorrected original file.
Regards.

[teerak2uk]

thanks for that although strange as i did try to clear it myself and after placing in the car i had to clear faults which is normal but after restarting the car airbag warning returned and read the fault with Lexia gave this info (see attached) maybe the prog i used has problems as in the list that module only listed under xsara not xsara picasso?

Also how are you able to check for crash data in the bin file what program are you using for that

[melmar]

Here is a clear file for your xsara picasso, looking at the file you posted it looks like must deleted a little to much,

[teerak2uk]

Just removed eeprom to read again does this have any faults inside that you can see


http://img51.imageshack.us/img51/2884/sdc14833.jpg

[melmar]

Looks the same as before, just over write the file you have with the file i gave you earlier, and you should be fine..

Thanks

[teerak2uk]

And this is another module not sure if it will be compatible to fit in the same car

http://img84.imageshack.us/img84/9163/sdc14834.jpg

[melmar]

will fit ok if you clear the crash data in line 380+ 390, they should read FF alll the way along..

[teerak2uk]

sorry i dnt understand this changing of lines etc what is the best prog to use from the forum and is there any way to tell whats been triggered sorry for all the questions but would the second module also be compatible with the same car as some numbers are different on the housing


many thanks

[melmar]

Here is your original file, with the configaration lines put back in... load this on your first module, and you should be sorted..

as for changing lines, it only means with upa-usb or similar, that you change the lines where crash data is stored...

[teerak2uk]

using xprog-m to do these done the first module thats all back together but how would you know what lines to change etc thats why prob easier for me to use a prog from the forum what prog do you suggest

many thanks

[melmar]

Don't really use programs, but the module your fixing now is on tachosoft resetter 64, not sure whether its on here, but sure somebody
will point you in the right direction..


Good Luck



Have just seen tachosoft resetter 64 has been posted last december....

[teerak2uk]

Here is your original file, with the configaration lines put back in... load this on your first module, and you should be sorted..

as for changing lines, it only means with upa-usb or similar, that you change the lines where crash data is stored...

Still same error when read with Lexia and dash displays Passenger airbag deactivated but have checked and is turned on at the key

[melmar]

Have you checked the switch where the key switches off the passenger airbag, they are known to be a possible fault area, usual citroen build quality....

[teerak2uk]

Have you checked the switch where the key switches off the passenger airbag, they are known to be a possible fault area, usual citroen build quality....


no just switched it on and off to be honest are they a make or break switch or do they have resistance in them

[melmar]

Not sure of the workings, but when i used to drive around turning off airbag lights at bodyshops, they were a commen problem, on citroen and peugeot, have seen them for sale on fleabay many times, so maybe replace and try, is worth turning on and off a few times first,

[teerak2uk]

did try switching it a few times just to see if there was any change but no still the same

[teerak2uk]

Nope still got problems with it

any ideas

[dawider]

did you solve your problem?

[teerak2uk]

yes but only by replacing the srs ecu with a new one from the dealer

[morfej]

Why didn't you try using the other SRS ecu 9652276980, by clearing it ?

[teerak2uk]

Why didn't you try using the other SRS ecu 9652276980, by clearing it ?


it was showing a configuration error so presumed it may be vin locked to the car it came from