PDA

View Full Version : dm800 stuck on loading



fay28
26th March, 2010, 07:14 AM
hi guys

got a dm800 with mage nab v12, when i flashed it was fine but then i could configure the box, took a break and and pulled the power, when ive gone back to it is now stuck on loading with the bar on the B letter. ive tried several other images but get the problem. i have been advised it may be a tuner problem

im thinking of returning it to the seller but i thought i would try here incase anyone can has solved this problem before.

thanks in advance.

Oily
26th March, 2010, 10:50 AM
Have you tried flashing it via the null cable method?

alex123
26th March, 2010, 11:49 AM
if its a genuine dm800 flash lastest gemini image via null modem then load nablo via null modem it should be ok then
alex

fay28
26th March, 2010, 06:27 PM
tried throught null modem same thing does not boot up, red led flases and it reboots.

can nayone sugess anything :(

tunesguy
26th March, 2010, 11:30 PM
its broke, return back to supplier ive had a few gone like that and if it doesnt do it now it will a few reboots later.. ive tried mine with loads a differant images and loaded image with serial cable :(

fay28
27th March, 2010, 07:49 PM
ok guys ive looked in to this further, and found out that when the tuner is removed then it boots, so the tuner is at fault.

anyone know best place to buy one?

opsmonkey
27th March, 2010, 07:58 PM
buy one..???

the box you bought is knackered.. send it back and get a full replacement

fay28
27th March, 2010, 08:36 PM
but the box boots up when tuner is removed.


this is going through a paypal dispute as it was purchased off ebay

Wingnut
27th March, 2010, 08:51 PM
mate take the dvi cable out then try and boot up, it happened to me the other day

fay28
28th March, 2010, 01:14 AM
mate take the dvi cable out then try and boot up, it happened to me the other day

iim using scart m8. what do u mean?

Wingnut
28th March, 2010, 11:26 AM
my box started going the same,stuck on boot up, when i took tuner out it also booted up,i was baffled, i thought i try and take my dvi cable out (the hd cable) and boot up and it did, i realised my dvi cable was causing this prob,i bought a new one and all good, i see ur no using one so i dont no mate, try taking ur scart lead out and booting up, try boot it up with only power cable in, worth a try mate

fay28
28th March, 2010, 11:45 AM
tried that m8, it boots up fine with scart and without tuner

Wingnut
28th March, 2010, 11:48 AM
did it come with 1 years warranty?, much did u pay for it mate?

fay28
28th March, 2010, 05:25 PM
paypal granted my dispute, box is going back for a refund.