racoxd
8th October, 2023, 07:02 PM
I have some issues after clearing the crash data in my Ford Focus 2017 (North America). I cleared lines:
1) from 0x280 to 0x380 with zeros.
2) from 0x380 to 0x1620 with FFs.
then compared it to the original unmodified file and it looks good, number of lines is the same. But my RCM module is not recognized after plugging it in to car.
Also, BCM shows DCT "B10A2 - crash input" which I just can't delete... I tried running the crash flag reset procedure in Forscan but it's available only for EU models because it shows "Crash flag is not set, nothing to do".
.bin file:
https://drive.google.com/file/d/1LOXF4No_7XtNq8hR6AcPxKjif2Ew4msm/view?usp=sharing
Any idea what's wrong?
1) from 0x280 to 0x380 with zeros.
2) from 0x380 to 0x1620 with FFs.
then compared it to the original unmodified file and it looks good, number of lines is the same. But my RCM module is not recognized after plugging it in to car.
Also, BCM shows DCT "B10A2 - crash input" which I just can't delete... I tried running the crash flag reset procedure in Forscan but it's available only for EU models because it shows "Crash flag is not set, nothing to do".
.bin file:
https://drive.google.com/file/d/1LOXF4No_7XtNq8hR6AcPxKjif2Ew4msm/view?usp=sharing
Any idea what's wrong?