Need MSD80 E93 30i 2nd lambda probe delete

[AR REMAP PORTO]

Hi all, can someone delete 2nd lambda probe, the one mounted on the 2nd CAT, problem is that the engine misfires at idle and low rpm/high load conditions, gives the following dtc's 2C3C (P14FF), 2C28 (P0001), 2A2C (P10E8) and 2C3E (P100F).

Need 100% correct solution, price isnt an issue, but have to try file first and must work properly (i have tried others unfortunately without success).

Thanks + REP and PP or Revolut pay ready.

Thanks in advance!

[duddy]

test and raport

pas pm tx + rep

[AR REMAP PORTO]

test and raport

pas pm tx + rep

I sent PM, please check ur inbox.

Thank u

[AR REMAP PORTO]

test and raport

pas pm tx + rep

Unfortunately not good at all, worse than Davinci or ADS solutions, its misfires even harder, and wants to die when at idle.

[Lambda1]

Dont worry daddy is here to assist you... It doesnt seams like a post cat problem or nox... the DTCs shows its Precat lambda error and thats why missfiring for sure (or maybe ecu faulty, msd80.. common). So give us more infos ;) and parts you allready changed ;).
I would be possible to run the 6cyl also by a single lambda sensor (if you recode ecu for and supress some error...) but isnt the goal.