volvo v70 akl

[sisanovic1]

hi guys,

I have a volvo v70 AKL. Took out the cem module and read 28f400 data.
Tried to load it in my autel and vvdi2, but the new chip ID48 megamos does not
want to lock and start the car. also tried to write back new dump but car does not start.
I atteched the file can someone check if file is good, and with what tool is it possible to write transponder.
thanks guys

[MartiLer]

dump ok....

[rob h]

I used tango oem tool, not to long ago.
Car started. i made positions 1 and 2.

Vvdi2 should work. I like the option to emulated all data off a excistsing key, to a transponder. Without writing back any new file.
It does not always work. Never tried this on a cem.
(Fiat bsi 93c86 worked perfect, id46)

To read, i used Smok jtag. ( after reading, use swap function in edit )

How did you read yours?

995994 Try my file, see if it makes a differens in locking your id48.