Landrover Discovery

[cristi_onofrei]

I need solution to disable immo on this car
ECU 0 281 001 352
eprom 2 x 27c256
eeprom 2 x 93c46

I can't imput EKA code to resync ECU with alarm
I try #C0 on 0Bh but don't work

[colinc1965]

if its a series 1 or 2 then you can buy a cable that takes the place of the immobiliser doing away with it altogether for less than ?10, if its a series 3 disco then you will have to take it to a francised dealer, sorry i cant be of more help m8:dontknow:

[cristi_onofrei]

give me please more details about this cable or place to buy

[BeianM]

Many people have a problem dialing in the eka code. But with practice it does work. The fob will resync with the uch if you press the button about five times. Mind you it looks like you have a bosch ecu going by the no. So may not work with the newer vehicle. Try ottocheck in the software section.

[cristi_onofrei]

My fob work but BCU is not symc with ECM
I try step by step instruction from manual but I can't initialize procedure to input code
I change booth EPROM with files from RANGE ROVER and BMW525TD
Car start but I can't accelerate because have different throttle and idle swich