Ford Transit 115hp AC11-12A650-BB

[ollync]

Hi ,
i am searching for original file for Ford
Transit 115hp , Visteon DCU201, or any other ori file that works for this ecu.

I think the actual software is modified because the rail pressure on idle is about 600 bar versus demanded pressure wich is 230 bar, and i cannot do pilot injection relearn.
Fuel injectors , HP fuel pump and rail sensors are new.

HW: AC11-12A6
SW: 9C11-12K532-HD
Spare: CGS-ST10F276
HW Ver: AC11-12B684-AB
SW upg: AC11-12A650-BB

Thanks in advance.

[Milicija]

Do high pressure fuel pump reset if the fuel metering valve (which is located on pump - denso regulator) is replaced with new and OEM part. If this doesnt help probably regullator is stuck. Only use original Denso SCV.

[ollync]

High fuel pressure pump reset was done , pump was replaced with new oem part and the injectors too. The car drives like it has 140-150 ps . So i think there must be some tune, no errors about fuel pressure or anything.
I only want to do injector pilot learn , because the engine is knocking on idle and on acceleration .

[ollync]

Nobody ever tuned this type of ecu before in all these years? [emoji2369][emoji2369]


Sent from my iPhone using Tapatalk