w218 corupted cgw with fvdi dump atached

[hp7909]

please repair dump (read with fvdi clone)

FE in adress 0000F and FF in adress from 00010 to 0001A. NOT WORK ,now i cant write eeprom over obd !!! will remove cgw and program eeprom with vvdi prog.

NEED GOOD FLASH AND EE2 FROM WORKING UNIT...

A2129023904
2125451001

[mercis]

w218 cgw?? w218 fbs4,what you wanr with clone avdi?

[hp7909]

Hi , I bricked car with fvdi 2018 clone when try to change mileage .Now fan work on max and no turn signals and cant diag car ! On media display it says anti theft blaaah and steering assistance not work too.... The atached dump is readed over OBD after i bricked car ... So tryed to edit dump and write it to car , and now cant write it over obd more . Fvdi says cant access turn ign on off. Have VVDI prog ori and if someone can repair dump i can write it directly to mcu. Thank you !

CAR is 2012 year.

Someone before rolled back odo because in ezs it shows 1 milion on dash 158k km only i wanted to do is to increase milleage...

[brend]

w218 cgw?? w218 fbs4,what you wanr with clone avdi?

Both.......... fbs3 and 4 all depends car year.
Yes this car have cgw in sam , like w212.

[mercis]

ok,zgw but w218 have FBS4,and nobody can km justage on this eis

[hp7909]

yes ,car is same like w212... but km are adjusted before because when i read it with fvdi it show me km in eis 1.6 milions.... on dash i have 158k km , its not real for 11--12 year car !

[mercis]

you can zgw with vediamo new flash

[hp7909]

Will try to get to work old vediamo 4.x.x with sm2 and report. I have .CFF 2129023904

[brend]

Will try to get to work old vediamo 4.x.x with sm2 and report. I have .CFF 2129023904

EEprom dump stuck in boot mode , after reflash vediamo away all must by ok .
If no help , I can help put this to work with full eep+flash for boot job .

[hp7909]

OK tommorow i can remove SAM from car and read flash + eeprom and upload it here !

[hp7909]

SAM and CGW MOTOROLA reads EE2 and Pflash both. No comm over obd.

With this car starts ,central locking WORK ,Power windows WORK,Anti theft on ntg ,airbag light on ,Power steering DEAD, turn signals not work but hazard work ,HVAc not work and cooling fan at max speed. Headlights ... don't know...

After some comparison i think My CGW EEPROM is totaly f%cked by fvdi

[hp7909]

Tryed to fix EE2 and P-flash it also was corupted with missing header. Can someone check files ?