PDA

View Full Version : Help me about im*o off Golf IV SDI I need help on how to do the VW Golf IV 2001 immo



Dacha
30th March, 2010, 08:31 PM
I need help on how to do the VW Golf IV 2001 immo off.ECU the bosch EDC15WM 0 281 010 373.
To the attachments from the original dump read eeprom 24C04.Thanks in advance!

kevfield
30th March, 2010, 10:02 PM
your file off

Dacha
1st April, 2010, 12:35 AM
I tried the dumps that you sent me but the car is not works. I pray for more detailed instructions for what should be done to successfully solved the problem. Do you have to perform editing and flash memory dumps in the ECU?

umoussa
1st April, 2010, 05:18 AM
The Posted Off file is correct

Are you sure your ECU is not faulty?

What is the story of the car and why you need Immo Off?

justfigures
1st April, 2010, 06:00 AM
I have A8 2002 with active imobalizer...can you switch it off..?? I have origonal good dump from cluster 24c17 eeprom. Or can the keys be re coded to the car manualy...??? Thanks.

umoussa
1st April, 2010, 10:52 AM
What is the ECU type in your Audi?

Dacha
1st April, 2010, 10:54 AM
The car is correct. The key is dropped from a great height onto a hard surface causing the broken part of the key in which the transponder was a key reserve no.

umoussa
1st April, 2010, 11:25 AM
As i see:

The posted off file is correct

- Did you read the EEPROM on board or Off board?
- When you write the bin file back, you wrote it on board or off board?
- Can you access the ECU after you put the off file by VCDS? If yes
Send us here a Full scan

Thanks

Dacha
2nd April, 2010, 01:47 PM
EEPROM is removed from boards and read and damp for immo off was added and the EEPROM returned on board.
I'll try to communicate with the ECU through VCDs and I get back and see the details.

Dacha
8th April, 2010, 01:48 AM
I have successfully done with the program imoff EDC15calc and engine is switched on.Dump in post 2 is not correct.