BMW i3 BDC/FEM Swap.

[srt8]

Hello everyone, I am planing to swap a BDC on a 2015 Bmw i3, with a used one. The original works fine, only thing couple of issues related to the BDC. So I have found a used one with the same part number. Can someone give me some ideas how to proceed ? I have the VVDI, prog and commander. My friend has the bmw explorer. I would appreciate the help.

[naelraddad]

loock here this will help
http://blog.xhorsevvdi.com/how-to-use-vvdi2-to-exchange-bmw-fem-bdc/
regards

[srt8]

Thank you but unfortunately I don’t have the BMW license for the vvdi commander. I was wondering if anything can be done with the bmw explorer, my friend does have the FEM/BDC prog option there

[BmwMerc]

Thank you but unfortunately I don’t have the BMW license for the vvdi commander. I was wondering if anything can be done with the bmw explorer, my friend does have the FEM/BDC prog option there

why don`t you ask your friend if he has BMW Explorer he definitely will answer all your questions.
btw, I wouldn`t do FEM/BDC with any other tools other than Explorer or Autohex

[srt8]

why don`t you ask your friend if he has BMW Explorer he definitely will answer all your questions.
btw, I wouldn`t do FEM/BDC with any other tools other than Explorer or Autohex
thank you for your advice, but he does not know it either since has not done it. so.......

[srt8]

why don`t you ask your friend if he has BMW Explorer he definitely will answer all your questions.
btw, I wouldn`t do FEM/BDC with any other tools other than Explorer or Autohex
i just end up repairing the original BDC. Thank you all