View Full Version : Peugeot 107 doesn't starts
JSap2012
30th November, 2023, 11:38 AM
Hello,
I have a Peugeot 107 with all key lost, I check to do immo off but it's not possible in that ECU, I ask to my key dealer, I send the immo eeprom file and they send me a transponder but the problem continues.
I don't have any DTC in engine ECU and I don't now what can I do, I check immo wires and I have all correct, I was looking for a starter kit but I don't found any.
Can anybody help me, please?
ECU info:
- Bosch 0 261 S06 147
Immo box:
89780-0H021
Many thanks
achaccha
30th November, 2023, 11:48 AM
This ecu is also used by Toyota, if you can post your immo and ecu files I could review them.
It is a matter of entering immo and verifying what fault code you have.
greetings
rafal
30th November, 2023, 12:16 PM
This ecu is also used by Toyota, if you can post your immo and ecu files I could review them.
It is a matter of entering immo and verifying what fault code you have.
greetings
+ key readed also good to see
JSap2012
30th November, 2023, 02:52 PM
Attached are the info from ECU and immo box, this is the original files
rafal
30th November, 2023, 02:53 PM
Attached are the info from ECU and immo box, this is the original files
key ???????????????????????
if you want to start car only by fles - good luck
JSap2012
30th November, 2023, 02:53 PM
And this is the file send by my locksmith provider
JSap2012
30th November, 2023, 02:54 PM
I don't understand, what do you need? The key info?
Hayssam1
30th November, 2023, 03:34 PM
Hello,
I have a Peugeot 107 with all key lost, I check to do immo off but it's not possible in that ECU, I ask to my key dealer, I send the immo eeprom file and they send me a transponder but the problem continues.
I don't have any DTC in engine ECU and I don't now what can I do, I check immo wires and I have all correct, I was looking for a starter kit but I don't found any.
Can anybody help me, please?
ECU info:
- Bosch 0 261 S06 147
Immo box:
89780-0H021
Many thanks
This is from my YouTube channel, maybe it can help you but unfortunately in Arabic
https://youtu.be/IqURfuZ9RGw?t=214
https://youtu.be/cP6d-2m0x08?si=rqCCJnEZjCtjP5Y6
JSap2012
12th December, 2023, 02:47 PM
Hello,
I do same than you in your videos and still the problem.
Car doesn't starts, I try to disconnect immo box and now starts and stop in a second. I turn to connect immo box and do the same, but now I can't communicatte with engine ECU.
Before it only communicated with the engine control unit and the airbag, now it only communicates with the airbag.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.