PDA

View Full Version : 2023 Kia Forte - Bricked



randyrash
4th December, 2023, 03:19 AM
Hello,

Looking for some help, I used odomaster on a kia forte 2023 and the lcd went blank. Everything else works on the cluster.

Can someone help me revive it and change mileage to 50500KM. I have vvdi prog.

Thanks,
Randy R

Nightdriver
4th December, 2023, 05:43 AM
Post yr file

hoangtu
4th December, 2023, 10:02 AM
1. remove negative baterry for 10 mint
2. try obd again

randyrash
4th December, 2023, 01:32 PM
Post yr file
what is pinout?

digimile
4th December, 2023, 03:43 PM
hi
not possible obd...
first check what processor...
thanks

Nightdriver
4th December, 2023, 06:00 PM
what is pinout?

Ope yr cluster, check which processor is there , post a good clear photo

randyrash
4th December, 2023, 09:19 PM
999522999523

Unfortunately there is no writing on the MCU that can be seen. Part number of the cluster is 94042-m7031.

Nightdriver
4th December, 2023, 10:00 PM
i think odomaster is making backup , y can use for the time being to make yr lcd live again, otherwise i dont know if that dump would help

https://cardamp.ru/view_full_one.php?id_damp_list=41664

what kind of mcu did y find inside?

randyrash
4th December, 2023, 10:14 PM
Nothing written on MCU, or it cannot be read.

randyrash
4th December, 2023, 10:35 PM
i think odomaster is making backup , y can use for the time being to make yr lcd live again, otherwise i dont know if that dump would help

https://cardamp.ru/view_full_one.php?id_damp_list=41664

what kind of mcu did y find inside?


Do you have pinout so i can write flash back?

Otonamdinh
5th December, 2023, 02:10 AM
Can you share this winbond read and write tool, thank you!

Otonamdinh
5th December, 2023, 02:12 AM
Bạn có thể chia sẻ phần mềm đọc ghi winbond này được không, cảm ơn bạn!

Nightdriver
5th December, 2023, 05:18 AM
Do you have pinout so i can write flash back?

I dont know which mcu do y have in this cluster, so i dont know the pinout, restore yr original flash using obstar odo master the tool y used first, it has backup file for yr mcu, retrive it to yr car again and see if the lcd would go back again to normal or not

digimile
5th December, 2023, 01:33 PM
hi
it cannot be written...proper way is open dash solder 5 wires and read and put 0 km and then do it with canFD adapter..
good tool for this job is stool.....best of all thanks

lwood
6th December, 2023, 12:27 AM
just read MB91F061 post both Main and work flash

randyrash
6th December, 2023, 02:35 AM
what is pin out for this one?

randyrash
6th December, 2023, 02:48 AM
I need h512JV driver file from cardamp but cant make payment because i'm from Canada. Anyone can help ?

Nightdriver
6th December, 2023, 06:47 AM
contact marina-rv