joaquinmjuan
12th December, 2023, 01:21 PM
Hello, I have been looking everywhere for the PinOut of this dashboard, and I have not found it. I had to go to the electrical diagram.
I share it, for whoever needs it. The dashboard only has a 32-pin blue connector. All the best.
Pin 1: one end of the fuel gauge potentiometer.
Pin 2: one end of the fuel gauge potentiometer. (The fuel gauge has a resistance of 300 Ohms. It is identical to a potentiometer. It has three terminals, one is the central socket of the potentiometer, and the other two are the ends. The center jack goes to GND).
Pin 7 and Pin 8: Inmo Coil
Pin 16: GND
Pin 20: GND
Pin 31: Term. 15 ( +12V)
Pin 32: Term. 30 ( +12V)
Pin 28: CAN H
Pin 29: CAN L
Pin 18: Temp. Gauge (a resistor is placed with one of its terminals to ground)
1000751
1000752
I share it, for whoever needs it. The dashboard only has a 32-pin blue connector. All the best.
Pin 1: one end of the fuel gauge potentiometer.
Pin 2: one end of the fuel gauge potentiometer. (The fuel gauge has a resistance of 300 Ohms. It is identical to a potentiometer. It has three terminals, one is the central socket of the potentiometer, and the other two are the ends. The center jack goes to GND).
Pin 7 and Pin 8: Inmo Coil
Pin 16: GND
Pin 20: GND
Pin 31: Term. 15 ( +12V)
Pin 32: Term. 30 ( +12V)
Pin 28: CAN H
Pin 29: CAN L
Pin 18: Temp. Gauge (a resistor is placed with one of its terminals to ground)
1000751
1000752