Mazda2 immo Fault syncro failed

[Nazo]

Hi guys hoping to find problem on this mazda2...
Car won't crank certain times & dtc in ecu & IPC

Please check bellow pic on forscan..I even earsed key reprogrammed the 2 keys back with success..
But when I tried " module initialization " it tries generate code but says " security access denied"https://uploads.tapatalk-cdn.com/20231214/dd59f04ea489fc4ccfdbcb183ea3960e.jpghttps://uploads.tapatalk-cdn.com/20231214/f4e51829f1fbd57b6a5ca8efdcee04b6.jpghttps://uploads.tapatalk-cdn.com/20231214/75d6db87650c19a20d96c46aae58a35a.jpghttps://uploads.tapatalk-cdn.com/20231214/b91ba4162fd9024c9ff687068af2bc03.jpghttps://uploads.tapatalk-cdn.com/20231214/41fc719534c6d42550a34cf99d4aa999.jpg

Sent from my SM-A235F using Tapatalk

[Nazo]

I look now on ecu wires I found 1 ground wire yellow/black going to ecu & its connected to another wire same yellow/black going towards engine somewhere is cut..not sure where that one supposed to be..look bellow https://uploads.tapatalk-cdn.com/20231214/4a520e58bf162959dffbccbf4aa2f0f2.jpghttps://uploads.tapatalk-cdn.com/20231214/7c42cd1670c8f3c2afefd29e6be5c53a.jpghttps://uploads.tapatalk-cdn.com/20231214/f0070501753a8def1af0fb8d18d41c8f.jpg

Sent from my SM-A235F using Tapatalk

[MartiLer]

Read ECU and dashboard dumps.

[Nazo]

Read ECU and dashboard dumps.Ok thanks I will upload it now I have read

Sent from my SM-A235F using Tapatalk

[Nazo]

here dumps IPC & ECU

[MartiLer]

Sync ok...

[Nazo]

Sync ok...Thanks given to you MartiLer..you right iv tried do module initialization & this time its ok...but still crank no start & 2 dtc in pcm P0602 & U3000
Car crank no start possible ecu failure?.https://uploads.tapatalk-cdn.com/20231214/0faff8f4472e92e3623a04095552c4e4.jpghttps://uploads.tapatalk-cdn.com/20231214/307e344e486e88e6eae76a58c5e1cc74.jpg

Sent from my SM-A235F using Tapatalk