PN-3000N-B IMMO off

[SVH]

Hi
Nissan PN-3000N-B in car - SECURE
I set 308h=02
Now in car INVALID EQ and PLEASE INIT

I can change state to Invalid EQ on the bench but pins EQ1-EQ4 are empty (means on the board they dont conect to contoller - resistors are missed from factory state), so i cant get mode CODE IN (looks like its impossible on this radio or im wrong?)

Please advice how run radio w/o car (Code In) or make any virgin dump
I dont know if radio from the car is native.

Thanx

[SVH]

Any idea????

[audio]

Hi!

try this, but only in the car.
start the car, turn on the radio and we'll see if it learns....

wbr.

[petronijul]

try this file

[SVH]

I tried in the car
Invalid EQ and after Please Init

[Mankyro]

I tried in the carInvalid EQ and after Please InitTry............

[audio]

I tried in the car
Invalid EQ and after Please Init

rewrite "00 00" to "FF FF" and try it in the car
If this is not good either, then FF FF and 308h (01 or 02) to 00 or to FF
Because of NATS 5 it has to be set to virgin and the car "learns"