Qfatech
20th December, 2023, 04:09 PM
Hi, can someone help me with a Audi A3 1,8T ME7.5 ecu.
I have some problems with limp mode. I have read this as a solution, but i dont know anything about it.
Software Patch via FVPDKLDUS in ECU Mapping (set to 0 across the 5×1 map)
FVPDKLDUS
It's located right before KFDLULS (threshold for overboost detection). You can set it to 0, or tweak it so it's not active on cold starts by raising the threshold at which it is active. If your cold start idle is 1200, raise it to 1300. No more code.
When its cold i goes i limp mode and code are 17705 p1297
In summertime it runs super fine, no probs at all.
Maybe delete the fault code ?
Thanks in advance.
I have some problems with limp mode. I have read this as a solution, but i dont know anything about it.
Software Patch via FVPDKLDUS in ECU Mapping (set to 0 across the 5×1 map)
FVPDKLDUS
It's located right before KFDLULS (threshold for overboost detection). You can set it to 0, or tweak it so it's not active on cold starts by raising the threshold at which it is active. If your cold start idle is 1200, raise it to 1300. No more code.
When its cold i goes i limp mode and code are 17705 p1297
In summertime it runs super fine, no probs at all.
Maybe delete the fault code ?
Thanks in advance.