View Full Version : citroen c2 mileage
coelhone
1st April, 2010, 08:39 PM
hi, need help to correct mileage from 174653to 77000km
sorry my english
thanks in advance
regards coelhone
jimmy82
1st April, 2010, 09:21 PM
addition to the 9346 KOMBI is also changing the mileage in the BSI unit (should be a 95,160).
The BSI is located under the steering to the left.
Post files
jimmy82
1st April, 2010, 09:23 PM
also serves the old mileage accurately, tomorrow will post the files
jimmy82
2nd April, 2010, 09:49 AM
try this and let me know:laugh:
coelhone
2nd April, 2010, 09:55 AM
how to know type of Bsi
v1-v2-v3 or v4????
thanks
PremierD
2nd April, 2010, 12:34 PM
how to know type of Bsi
v1-v2-v3 or v4????
thanks
You have to find the km's in the BSI .....
and you're looking for km's X 10 > hex xor FFFFFF in reverse...repeated 4 times...
That make it easier for you mate .. lol
jimmy82
2nd April, 2010, 01:27 PM
how to know type of Bsi
v1-v2-v3 or v4????
thanks
I used the V3.
did you already tried?
hello:laugh:
coelhone
2nd April, 2010, 08:04 PM
try this and let me know:laugh:
km are ok now thanks but car does not start??
Engine light is on in dash.....
does anyone have a dump from bsi to compare if my dump is ok
thanks
z786
3rd April, 2010, 01:03 AM
but back your original dumps, check if car starts
if it does try using dif version of bsi
jimmy82
3rd April, 2010, 01:05 PM
a question:
you disconnected the battery before unplugging kombi and BSI?
machines such as C2, C3, etc. 206. Always disconnect the battery and better. testing with the original dump is otherwise necessary to "recode" the keys in the BSI with a test that supports it. (otherwise you have to remove im*0
hi
coelhone
5th April, 2010, 11:31 AM
hi
but back your original dumps, check if car starts
if it does try using dif version of bsi
it doesn't :afraid:
bad dump????
a question:
you disconnected the battery before unplugging kombi and BSI?
yes i did
how can i remove im*o?
thanks in advance
coelhone
coelhone
7th April, 2010, 07:37 PM
hi someone has virgin dump of bsi?
thanks in advance
regards coelhone
jimmy82
7th April, 2010, 09:07 PM
try with im*okiller
RapidShare: 1-CLICK Web hosting - Easy Filehosting (http://rapidshare.com/files/350284344/Im*oKiller_1.10.rar)
Replace the "*" in the link with "m"
I have never taken im*o. in my country is banned
coelhone
14th April, 2010, 11:58 PM
hi
look door don?t work , car don't start....
what did i do wrong , can someone help?
could be bad dump of 95160 from bsi???
thanks in advance
coelhone
looly
15th April, 2010, 01:39 AM
Hi
Double check your dump and soldering as sometimes the basics are easily overlooked when in a situation likes this. The bsi units can be very tempremental. Let us know how you get on.
coelhone
15th April, 2010, 11:51 PM
hi
whith original dumps car ?don't start....:afraid:
any ideas????
thanks for reply
coelhone
z786
16th April, 2010, 12:19 AM
see if you can get a diagnostic check done on car, post all dtc's
Babanovski
16th April, 2010, 01:28 AM
I have same situation,
what i did is reprograming the bsi, with lexia is 10 min job.
Henry17
16th April, 2010, 05:48 AM
muchas gracias
coelhone
8th May, 2010, 07:55 PM
hello!
i have buy lexia (clone) and now need help
a virgin dump for bsi and how to do it????
thanks in advance
regards coelhone
coelhone
18th January, 2011, 09:17 PM
hi nall DK's
someone have a virge dump for this bsi??? or verginize this one ....need it because there are some problems with car
thanks in advance
:fisheye:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.