nissan micra mec32-020, unican emu

[jordiksvk]

hello folks
it it ok prepared for unican ?

nissan micra k12
mec32-020
93c66 eep

SYNCHRO:
in ecu eep:
AB FD 55 B7 71 F9

need be reversed synchro in unican emu ?
thanx

nats6

---------
car without coil for key not cranking starter (with unican emu)
with coil - cranking starter but not starting.....
led on unican emu still blink on green.....

eep and unican eep are in attachment

[avital]

1- If the LED flashes green, the ECU is disarmed, the starter has nothing to do with the ECU in this immobiliser system, and the emulator disarms the immobiliser in the ECU.
2-Speaking in simple terms in this system - the starter relay is not controlled by the ECU.
3-The emulator communicates with the ECU via the NATS protocol and knows when the ECU is truly disarmed - then the software in the emulator switches on the green LED.

[danielif]

Immo off in this ECU without EMULADOR maked in MCU avalable...

[avital]

Immo off in this ECU without EMULADOR maked in MCU avalable...

the question was not about disabling the immo - just why the ECU does not manage the starter relay.

[jordiksvk]

avital, is ok the emu prepared?

[avital]

avital, is ok the emu prepared?

1 - ECU have nothing to manage starter relay.
2 - Software in this type emulator UNICAN can recognize if synchro is not ok, in these case -> RED LED will start blink.
3- I believe you know the support contact details of the distributor you have purchased from, if you cannot get adequate support from the distributor, you also have contact details available on the manufacturer's website for communication via skype.

[keycutters]

Hello danielif,

kindly help me with immo off for Pathfinder Mec36-020
attached is the flash file.
Thanks and Reputation given
thanks

[keycutters]

Immo off in this ECU without EMULADOR maked in MCU avalable...danielif and team your help needed.
Thanks

Sent from my Infinix X6835B using Tapatalk

[keycutters]

Hello team,
Still waiting on any noble person with solution.
Thanks

Sent from my Infinix X6835B using Tapatalk

[danielif]

Hello. What tool do you use to read and write? Recalculate the checksum?
Contact me for details...

[ngakson2002]

Dear Danielif; please can you help me with a Good working immo off solution or Help recalculate Checksum of the one IMMOKiller send to me and is not working from the file attached which is from an INFINITY ECU MEC 35 250 MCU SH7058


Best Regards

[danielif]

Immo Off file is Ok, but need delete P1610 and P1614. Checsum recalculate in vriting process by TOOL...