cas 3 mask 0l01y problem not switching on

[stevejia]

cas 3 mask 0l01y problem not switching on only parking brake on dash anyone who can assist repair dump

[rob h]

You should post the cas partnumbers!
This way, you will help others.

You could check,if there is a flash, with your sw version on DK.
And test then that.

What were you up to?

It just failed? Or you played with it? Then it failed?

[atomantmk]

Test with this flash and report!

[stevejia]

not correct flash file size

[stevejia]

61.35_6943830_01 2070113043
car was working it just stopped switching on after a few troubleshooting discovered it was cas i also tried one from another car it switched on

[erkor]

61.35_6943830_01 2070113043
car was working it just stopped switching on after a few troubleshooting discovered it was cas i also tried one from another car it switched on


Look here
https://www.digital-kaos.co.uk/forums/showthread.php/935252-CAS-3-0L01Y-Need-Flash
#6

If the new flash does not solve the problem, it seems that the eeprom reading is bad.

[atomantmk]

not correct flash file size
Autel has own size and because of that don't match, try to write any programmer...