12manux
8th January, 2024, 11:52 AM
Hello guys,
long story short : i bought myself a 2016 Audi Q5 flooded .
Everything removed cleaned and so on ,replaced all modules affected.
BCM2 is 8KO907064KH -----Renesas D30F3634 ------1510KE428 microcontroller (no external eep) .Since this in locked BCM2 ,i bought a 2nd hand unit same HW/SW number and swapped microcontroller.
All modules have diagnostics ,when i press start button i get " Ignition lock defective on dash" and car will not engage KL15 .
Car doesn t have ELV (auto trans) .
on BCM2 i have following error : 00003-Control module
034 : Defective.
Checked everything ,it seems that this is a BCM2 sw fault.
Now i can buy a new BCM but i m trying to save this one.I borrowed a POLDIAG tool from a friend and will try to repair SW this week.
Anyone had this problem before? Any tips ?
Thank you !
long story short : i bought myself a 2016 Audi Q5 flooded .
Everything removed cleaned and so on ,replaced all modules affected.
BCM2 is 8KO907064KH -----Renesas D30F3634 ------1510KE428 microcontroller (no external eep) .Since this in locked BCM2 ,i bought a 2nd hand unit same HW/SW number and swapped microcontroller.
All modules have diagnostics ,when i press start button i get " Ignition lock defective on dash" and car will not engage KL15 .
Car doesn t have ELV (auto trans) .
on BCM2 i have following error : 00003-Control module
034 : Defective.
Checked everything ,it seems that this is a BCM2 sw fault.
Now i can buy a new BCM but i m trying to save this one.I borrowed a POLDIAG tool from a friend and will try to repair SW this week.
Anyone had this problem before? Any tips ?
Thank you !