PDA

View Full Version : Simos PCR 2.1 K- line?


p38
9th January, 2024, 02:09 PM
Which ECU pin is the K line on? Can you share the pin description of the PCR 2.1 driver?
leaserhu
9th January, 2024, 05:15 PM
only in can

https://ecu.design/ecu-pinout/pinout-siemens-pcr2-1-irom-tc1796-vag/
p38
9th January, 2024, 06:14 PM
only in can

https://ecu.design/ecu-pinout/pinout-siemens-pcr2-1-irom-tc1796-vag/

Thank you for your interest, are you saying that this ECU does not have a K-line connection to EOBD? I'm asking because I want to flash VCP on a table outside the car.
Will this be pinout 19?
alkazav
9th January, 2024, 06:40 PM
you cant flash without immo with vcp
p38
9th January, 2024, 09:04 PM
you cant flash without immo with vcp
It doesn't matter that the driver has already been unlocked by FGTech V54?
The cause of the blockage is the immo?
nemitom
10th January, 2024, 08:25 AM
if unlock eeprom no problem to flash on bench.... immo not block flash... it is important to have 60ohm on the canbus (add a 120ohm resistor between can hi and low)