PDA

View Full Version : a6c6 3.0 tdi BMK 4F0907401A egr/dpf/flaps off



rajszek94
12th January, 2024, 06:47 PM
I wanted to remove the egr from the controller myself, but the MPPS device killed the ECU. I found a full backup of the controller on the network and using ktag the car is now alive. Originally, the Audi no longer had egr and the flaps were turned off. now I want to ask for help, I need the egr/dpf/flaps off file.
when it reads flash ktag it gives information that chks is bad.
in the attachment I read the flah and the backup that saved me

rajszek94
15th January, 2024, 09:44 AM
Hello, can I ask for help in calculating the checksum? and checking the correctness of the solution off .

Lusitano94
15th January, 2024, 09:47 AM
Hello, can I ask for help in calculating the checksum? and checking the correctness of the solution off .

Here chk corrected

qni666
15th January, 2024, 09:50 AM
I wanted to remove the egr from the controller myself, but the MPPS device killed the ECU. I found a full backup of the controller on the network and using ktag the car is now alive. Originally, the Audi no longer had egr and the flaps were turned off. now I want to ask for help, I need the egr/dpf/flaps off file.
when it reads flash ktag it gives information that chks is bad.
in the attachment I read the flah and the backup that saved me

For info davinci ( from 2 members ) not work will see this after write :)

Hazerssmurf
15th January, 2024, 09:58 AM
please enter your software and hardware number
your flash file is not correct it is too small

qni666
15th January, 2024, 10:00 AM
please enter your software and hardware number

Audi A6 3.0tdi Bmk Automatik 4F0910401F 0030_1037371077

rajszek94
15th January, 2024, 10:04 AM
your message box is full, can you give me the password

rajszek94
15th January, 2024, 10:32 AM
KTAG keeps displaying information about error checksum

Lusitano94
15th January, 2024, 10:38 AM
KTAG keeps displaying information about error checksum

CS made by winols

Hazerssmurf
15th January, 2024, 10:44 AM
here without pass

rajszek94
15th January, 2024, 12:06 PM
I cannot upload these files. Maybe I'll try a different way, I have a backup using mpps v18. But when you try to upload the software, the device cannot wake up the driver and the process stops at 0%, after which the driver stops working. Is there any way to restore the backup via mpps?

Hazerssmurf
15th January, 2024, 12:09 PM
delete your messages so that people can write to you again

Dif
15th January, 2024, 12:50 PM
------------------keess ===

rajszek94
15th January, 2024, 03:05 PM
My friend Hazerssmurf helped save my car, I am very grateful to you.
The problem was with my equipment.