View Full Version : ppd 1.5 clone
andrealana97
17th January, 2024, 10:25 PM
hi to everyone, i need to clone only immo data from one ecu to another. cant just copy eprom bc we suspect corrupted software/codin the car doesnt respond to any remapping after 3k rpm and no dtcs..
i have a new ecu same number i dont want do do immo off i want to clone only immo data
thanks
ecu is ppd 1.5 from passat b6
let me know if need files original
sorry for bad english
Gesha Nemirov
18th January, 2024, 12:09 AM
Dash-EcuTeacher1.8 Loader
immokill
18th January, 2024, 12:12 AM
No immo off mate , What tools you have ?
If you have vvdi2 you can you extract pin cs and go to adapt ecu via obd port ....
why dont you flash original software with ODIS ,if software is problem?
Must write what tools you have mate
regards
immokill
18th January, 2024, 12:15 AM
https://www.digital-kaos.co.uk/forums/showthread.php/392966-VAG-Dash-Ecu-Teacher-1-8-FREE4ALL?p=2195623&viewfull=1#post2195623
immo is not in dash , I dont have this software , but you can extract immo data from comfort module behind glovebox. or from ecu
easy change ecu with vvdi2 but I dont know what tools you have
lupu_sandu
18th January, 2024, 10:43 AM
Exist immo off for all PPD1.x
volodin69
18th January, 2024, 10:50 AM
Hi. Might exist. You know it better, as being the guru of immo. I did one with emulator, but not sure where i was wrong on... So, it did not work.
Odis and reprogramming immo data was what solved it.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.