PDA

View Full Version : clone bcm ford volvo



lebossejames
20th January, 2024, 10:00 AM
hi

i want pinout bcm ford smax because i have problem immo, my car start when it wants, when doesnt start i have default immo active in dash.
Doesnt have immo in dashboard
bcm 7G9T-14A0736-AD
forscan can adapt?

thanks

lebossejames
20th January, 2024, 11:45 AM
i want clone bcm or adapt with forscan its possible?

rob h
20th January, 2024, 09:36 PM
7G9T-14A073-AD is Ford not
7G9T-14A0736-AD with type error.



You can try, with Forscan,
Dont think, you will be able to get the correct secuity login.

M30882FJVGP qfp144 M32C
25lc320

Oem dealer tool, is the best option.

Are you sure, the bcm is faulty?

brend
20th January, 2024, 09:53 PM
i want clone bcm or adapt with forscan its possible?


Best option clon .
Second , after bench job you also have full original if samething go wrong .

Are in here get water ?

lebossejames
20th January, 2024, 10:25 PM
thanks


today i have try with forscan, i have reset new module , flag crash reset because smax have collision, and programmed pats but when i want initialize modul i have error failled, i have try many time but its same.
No im not sure its bcm defective, the customer its want clone bcm for him its problem of bcm.
He has 2 key, same problem with a both.

i have open old bcm have not watter

rob h
20th January, 2024, 11:16 PM
ioterminal , if you want to clone.

And with a programmer, i could not read these Ford bcms.
Smok jtag, Orange5, not possible.

volodin69
20th January, 2024, 11:19 PM
It's not the bcm. 100%.
Bcm can be cloned with ioterminal or ioprog.

lebossejames
21st January, 2024, 12:14 AM
i have not ioterminal ok thanks not with other?

me too i think but tell me what is it? do you have supposition?

thanks guys

rob h
21st January, 2024, 11:24 AM
What country are you from? There must be some helpfull DKers in every country, with io, to help.

But Volodin, he tells you, to look beyond the bcm.

Steering lock, if failed, you get a warning, keyless not ok, you also get a diag solution.

Relais, and fuses, you have rotated these.
Always rotate, even the fuses. Seen to many overlooking a bad fuse, or fuse clamps.

If it wont start, ignition does come on full, i assumme.
Starter wont engage?

If starter engages, it is often the fuelpump, or connector or pump.

lebossejames
21st January, 2024, 11:54 AM
hi my friend

no for him its sure its bcm , have do diagnostic with other, its said is not key beaucause its same with a both , no dash its bcm.
for me , im not sure but its said clone bcm if its ok or not ok , he pay.
its not fuse beaucause many time you can start when you have message in dashboard immobiliser actif you can not start car.
i think its coil but monday i try with other coil. no problem powersteering its key not system key less.