EDC17C59 Opel Insignia 2013 Reading Ktag Help

[mesterel87]

Hello guys, I have that opel insignia and trying to DPF Off that ecu EDC15C59.

Can someone help me with the wiring connections for Ktag china clone?

Please help

Thanks

[rafal]

use better tool not shit job as you wrote

[mesterel87]

Found the correct connection
Using DB15 connector Pin 5/46 (ECU) - Vcc (Red), Pin 2 (ECU) - GND (Black), Pin 66 (ECU) - Can H (White), Pin 65 (ECU) - CAN L (Green) and yellow one from the GPT Cable to the GPT pad inside ecu. Soldered two 470 ohm resistors like in the Ktag info Picture and here we go. I can read/write that ecu.

Thanks anyway for help.

[mesterel87]

OK will do that. Thanks for your help..