PDA

View Full Version : Yamaha xj6 mileage check reading


neo24h
24th January, 2024, 08:46 PM
Hello
someone can check the correctness of the reading
I will replace the odometer,I need it 27,000 KM

Thanks
jomberykaso
24th January, 2024, 08:59 PM
Upload the file instead of a empty folder.
neo24h
24th January, 2024, 09:29 PM
Hello
someone can check the correctness of the reading
I will replace the odometer,I need it 27,000 KM

Thanks


Sorry , content corrected ,file added
neo24h
25th January, 2024, 03:10 PM
Sorry , content corrected ,file added


Hello and what do you guys think, good read :tears_of_joy:
Thanks
perukeyservice
25th January, 2024, 03:13 PM
93c65.....?
neo24h
25th January, 2024, 04:25 PM
93c65.....?
yes 93c56 :)
perukeyservice
25th January, 2024, 04:29 PM
i write inbox PM
jomberykaso
25th January, 2024, 05:00 PM
next time post the exact original kms/mls
neo24h
25th January, 2024, 07:05 PM
How will it show up on the odometer, whether in KM or miles? Is it possible for it to be displayed in KM?


Thank for all and best regards
jomberykaso
25th January, 2024, 07:35 PM
Just put my file, you will see exact 27000 kms
neo24h
27th January, 2024, 05:53 PM
10087261008724no mileage, and the tachometer does not work

How to connect it on the table so that it shows the mileage?
jomberykaso
27th January, 2024, 06:14 PM
My file is 100 % good, check your side.
neo24h
27th January, 2024, 07:35 PM
1008738shouldn't this line be the same as the beginning? 04 13 fb ec


after programming the org file indicates the mileage





I modified the last lines and it looks ok




after changing the odometer from miles to km it shows 44
neo24h
28th January, 2024, 12:22 AM
https://carprogonline.com/dashboard?category=Bikes&brand=Yamaha&model=XJ6+KM&memoryType=


does not show the mileage
neo24h
28th January, 2024, 08:31 AM
maybe there was a reading error in the original file? I uploaded several files and the counter does not change, but when I upload the original one,
neo24h
28th January, 2024, 11:42 AM
guys, any ideas?
neo24h
28th January, 2024, 05:32 PM
different programmer, file read differently
sv2hqx
28th January, 2024, 05:41 PM
Take a picture from EPROM pkaced
jomberykaso
28th January, 2024, 05:56 PM
different programmer, file read differently


File is the same , it just has bytes swapped.....what programmer are you using for?
neo24h
28th January, 2024, 06:39 PM
Just put my file, you will see exact 27000 kms

Hi
your modification turned out to be good , I opened the file in the program and pressed swap bytes , I uploaded it to the counter and it works
so there is something wrong with the programmer ,what am I doing wrong?
thank you very much for your time,
neo24h
29th January, 2024, 06:16 PM
https://www.reveltronics.com/en/shop/18/8/chip-programmers/revelprog/revelprog-is-serial-device-eeprom-flash-programmer-usb-detail

I didn't know about it until I used Wellon V290
I saw that the baits is swapeed