Audi A6 immo

[kmike84]

Hi everyone!

I have a problem with an Audi A6 2.5 TDI Year 1996. The im*o box (I don't know the type) sometimes disables the start of the motor, and I would like to disable the im*o. The ecu type is 0 281 001 230/231. I could dump the 93c46 from the ecu, wich is attached. Please help me!

edit: ecu number wrong, correctly: 0 281 001 320/321

Thanks in advance!

Br,
Mike

[kevfield]

your ecu number doesnt look right to me i find seat leon from 0 281 001 230???

[kmike84]

your ecu number doesnt look right to me i find seat leon from 0 281 001 230???

this ecu was built in more cars, 1.9 and 2.5 TDI engines too

Br,
Mike

[djwacik]

How could one and same ECU drive 4 and 5 (or even 6) cylinder engine?

[kmike84]

How could one and same ECU drive 4 and 5 (or even 6) cylinder engine?

This is no common rail diesel ecu, it only adjust the fuel distributor pump

Br,
Mike

[djwacik]

It does not matter!
1.9TDI uses other ECUs than 2.5TDI. They even do not belong to the same family - it does not matter if we are talking about older 5 cylinder 2.5 or newer 6 cylinder engines!

EDIT: BTW - ECU with 0 281 001 230 Bosch hardware number is MSA15 for 6 cylinder naturally aspirated MB W210 E300D :rock:

[kmike84]

I dont understand this hole car now :) I have the car in front of me, and I have taken out the ecu :) The engine was running nicely :) I am talking about this ecu:

ECU Steuergert 4A0907401P Audi A6 2.5TDI AEL 0281001320/321 Motorsteuergert control unit - Berlin - Auto (http://berlincity.dootee.de/ecu-steuergerat-4a0907401p-audi-a6-2-5tdi-ael-0281001320-321-motorsteuergerat-control-unit-iid-73290653)

Edit:

now I see it :D I mistyped the ecu number in the first post... sorry guys!

Br,
Mike

[carclima]

one of the oldies..EDC 1.3.1 (MSA 11) build in all audi 2,5 tdi with AEL engine..until "97..but my friend I yust dont remember that I ever need to make imo off on this car..have you read any eror code on car?


OK I check all myne data base and there is no immo off solution that I ever made on this unit..can you post eror codes from engine ECU and from immo ? picture of ecu internal?

regards !

[kevfield]

ECU BOSCH EDC 1.3.1 (MSA11) I think this have 2x 93c46 ?? i try to help

thanks kev

[kmike84]

ECU BOSCH EDC 1.3.1 (MSA11) I think this have 2x 93c46 ?? i try to help

thanks kev

yes, it has 2x 93c46! I will post photo later.

BR,
Mike

[kmike84]

Photo is attached from ecu, 93c46 dump is in first post.

[kmike84]

one of the oldies..EDC 1.3.1 (MSA 11) build in all audi 2,5 tdi with AEL engine..until "97..but my friend I yust dont remember that I ever need to make imo off on this car..have you read any eror code on car?


OK I check all myne data base and there is no im*o off solution that I ever made on this unit..can you post eror codes from engine ECU and from im*o ? picture of ecu internal?

regards !

Log from vag-com:
---------------------------------------------------------------------------

Monday,05,April,2010,18:07:16:26365
VAG-COM Version: Release 704.1

Address 25: Immobilizer
Control Module Part Number: 4A0 953 234
Component and/or Version: IMMO AUZ9Z0S4340959 D76
Software Coding: 00000
Work Shop Code: WSC 00874

No fault code found.

---------------------------------------------------------------------------

Address 01: Engine Labels: None
Part No: 4A0 907 401 P
Component: 2,5l R5/2VT EDC HS D02
Coding: 00000
Shop #: WSC 00000

1 Faults Found:
17978 - Engine Start Blocked by Immobilizer
P1570 - 35-10 - - - Intermittent
-------------------------------------------------------------------------------

Key is original, it starts the engine 9 times from 10...

Br,
Mike

[kmike84]

do I need to use a vag immo emulator?

[djwacik]

I would say you should first check the reading coil and it's wiring, then immobox - ECU wiring. It looks like something is giving up slowly...

[yasser]

do I need to use a vag im*o emulator?

Yes, im*o emulator is most easyest way to make im*o off on this car.

[kmike84]

Yes, im*o emulator is most easyest way to make im*o off on this car.

Is there a working schematic and hex file avaiable for the emulator somewhere?

Br,
Mike

[umoussa]

Read both 93C46 and post them here

I will make it off to you

Thank you

[kmike84]

Read both 93C46 and post them here

I will make it off to you

Thank you

Both 93c46 dumps are in the rar file

Thanks in advance!

Br,
Mike

[umoussa]

Thank you Mike

I will do that to you now. Please add me to your MSN or Skype

Thank you

[umoussa]

Here you go the off files

Thank you

[kmike84]

Here you go the off files

Thank you

Thank You! it works :)

Br,
Mike

[Bruce Willis]

umoussa may i ask password?

[tuning]

I Umoussa, may i ask password?

[cricstudio]

hi
PLEASE
SOMEBODY CAN GIVE ME THE PASS
FOR THIS FILES 2 X 93C46 IMMO
THANK YOU

[rabie_m]

thanks in advance frend i need pass plis

[viacryptos]

HEllo! can anyone send me the pass in PM???!!
Thanks!

[goranradovicpg]

Yes, im*o emulator is most easyest way to make im*o off on this car.
please sen me pass goranradovicpg@gmail.com

[abdulrauf]

HEllo! can anyone send me the pass in PM???!!
Thanks!

[hafido1983]

how are you ...
i want to download any file and i receive these message..

Your user account may not have sufficient privileges to access this page. Are you trying to edit someone else's post, access administrative features or some other privileged system?
If you are trying to post, the administrator may have disabled your account, or it may be awaiting activation. Check your registered email address for an activation link.
If you are trying to download files from the download section or download attachments, you are required to post on the forums before gaining access. After posting, your account will be upgraded within 15 minutes. Please don't post asking why you can't download, if you have posted, permission will be automatically granted.
can you help me for download the files
thanks

[Min2xx]

Here you go the off files

Thank you
Hi, I very need this solution too, 2x93C46 in .rar

[umoussa]

NO Passwords are being shared

Why do you need the password? You have a similar case, good, post your files here same as the other members, or you have much more importance than the others?

[SundayNightDriver]

Some people would like to understand how immo off on certain ECU types works. Why don't you show us how it's being done so we can help others too?

[Min2xx]

Some people would like to understand how immo off on certain ECU types works. Why don't you show us how it's being done so we can help others too?
It cost money :)

[Hack01]

Here you go the off files

Thank you
Hi please send me dump immo off.
Audi A6 4A0 907 401 P
0 281 001 320/321
2x93C46

[Ludovik]

could you give a password please

[Redoc]

Hi ,
I have same problem,need disable immo at ecu.
0 281 001 320/321 4A0 907 401 P

[A11463]

hi umoussa,

:blue:
need help with 0 281 001 320/321 too

many, many thanks to you
best regards

[A11463]

Read both 93C46 and post them here

I will make it off to you

Thank you

Hi umoussa!

I have a problem with an Audi A6 2.5 TDI year 1996.
Im*obox sometimes (now most time) disables the start of motor, and I would to disable the im*o.
Try to change reading coil didn't solve the problem and do it with all 3 keys

The ecu type is 0 281 001 320/321.
I dump the 93c46 in 16Bit from ecu, wich is attached.

Need your help, I've never done this ECU before but I read that it is to do in IS104 and, or IS204

best regards and many, many thanks to you

[Redoc]

204389immo is in IS204, write 00 to buffer at 02C to 03F , cut IMMO BOX.

[A11463]

Hi Redoc
Thank you very much
I've seen you had same problem,
so I think your solution will work for this
I'll try it next days

thank you very much
best regards

[becool]

Hi please help to do off ecu 0281001320/321 audi a6 2.5tdi AEl THANKS

[Redoc]

280862 must work. try.