View Full Version : CITROEN C3 2004 HELP
gifret
15th February, 2024, 09:35 AM
hi friends
car Citroen C3 hdi 1.4 from 2004 and his ecu is damaged.
ECM SIEMENS SID804 5WS40110C-T
SW9653447480
HW9648624280
1011969
THE OTHER IS SIEMENS SID804 5WS40068C-T
SW9652888580
HW9648624280
1011970
I READ FLASH 29F400BB FROM ORI ECU AND I VIRGIN IT WITH IMMO UNNIVERSAL DECODER ALSO MEUCCI AND GIVE THE SAME RESULT.
MY QUESTION IS
IS THE SECOND ECU CAN REPLACE THE ORI AND IF I MUST ONLY VIRGINIZE FLASH OR SHOULD BE ALSO EEPROM MUST BE VIRGIN.
IS IMMO OFF CAN WORK IN THIS ECU
HOW TO PROCESS .
THANKS AND GOODLUCK.
vladanr
15th February, 2024, 11:05 AM
only virgin send your files org and vir
gifret
15th February, 2024, 11:25 AM
hi friend
what do you mean with vir
thanks
vladanr
15th February, 2024, 11:39 AM
virgin to gheck with my option
gifret
15th February, 2024, 11:45 AM
hi
here ori 29F400BB
1011993
thanks
vladanr
15th February, 2024, 12:22 PM
1011995 try this
gifret
15th February, 2024, 12:31 PM
THANKS FRIEND
I VERIFIED YOUR FILE WITH MINE - READ WITH MEUCCI AND IMMO UNIVERSAL TOOLS- THEY ARE THE SAME.
ONE MORE TIME THANKS.
OTHER QUESTION .
IS NECESSARY PAIRED ECU WITH BSI IN THIS ECU.
THANKS
gifret
15th February, 2024, 08:16 PM
hi friends
is necessary to paired ECU motor with bsi with this type SID804 or they are somthing else to synchronyze.
thanks
gifret
16th February, 2024, 12:53 PM
any idea
yhanks
lion0304
17th February, 2024, 05:23 AM
If ECU not locked, why you virgin the Dump?
Write both eeprom + Flash to doner then start
gifret
19th February, 2024, 07:00 PM
thanks friend
can i swap eeprom 93C56 + fflash 29F400BB into new ECM with the same type SID804 and different SW and HD.
thanks lot
gifret
20th February, 2024, 02:01 AM
hi friend
i try to write Flash 29F400BB but the process stop in 85% and windows open shorin error also when i write the backup file.
for information i use Ktag clone and car is C5 with SIEMENS SID804 OPTION.
1012742
can be ECM is in protected mode .
can some one help .
THANKS
volodin69
20th February, 2024, 07:58 AM
Just as a question. If you write back the ecu's dump, (not the one of the car), does it go to 100%? Or same with both flash dumps?
P.s. if the protocol for sid804 is the same as used for ori ecu, is ok.
pawl
20th February, 2024, 08:21 AM
from what I can see you have two different drivers ,it is possible that the processor does not support other flashes I had so when I made a manual gearbox from an automatic ,the correct driver solved the problem
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.